2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

1987 fuel Injectors

Thread Tools
 
Search this Thread
 
Old Apr 14, 2008 | 12:29 AM
  #1  
2NDGENKID's Avatar
Thread Starter
project 87 in making
 
Joined: Mar 2008
Posts: 78
Likes: 0
From: Fenton
1987 fuel Injectors

I measured the ohms of the top two injectors they both were 2ohms. The manual says it should beed around 14-16. so i guess their bad. I need to know if any one knows were to get some new injectors. and how do you know if there high or low amps.

thanks
chris
Reply
Old Apr 14, 2008 | 12:45 AM
  #2  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
Read the FAQ. Those injectors are in spec.
Reply
Old Apr 14, 2008 | 10:39 AM
  #3  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
There was a cutoff around 87.5. For the first half of 87, low impedance were used. Then they went to high. So '87s can have both depending on when they were built.
Reply
Old Apr 14, 2008 | 11:27 AM
  #4  
polito Racing's Avatar
so you got pistons oh wow
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 900
Likes: 0
From: Killeen, Texas
The cutoff for 87 1/2 is June 1987 and splits at VIN # ending in 550168.
Reply
Old Apr 26, 2008 | 12:41 PM
  #5  
2NDGENKID's Avatar
Thread Starter
project 87 in making
 
Joined: Mar 2008
Posts: 78
Likes: 0
From: Fenton
my car was built in jan of 87. 1/87 so i have low impedence. what is the cc's of the stock injectors. i seen 550 to 1200cc. Im not sure what to buy.
Reply
Old Apr 26, 2008 | 12:44 PM
  #6  
gear_grinder's Avatar
Don't hate my V8
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Mar 2006
Posts: 1,129
Likes: 0
From: Cornfield, Indiana
you have low impediance injectors, if the car is turbo than the injector size is 550cc, if na than 460cc. 1-3ohms is in spec (i think).
Reply
Old Apr 26, 2008 | 02:41 PM
  #7  
polito Racing's Avatar
so you got pistons oh wow
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 900
Likes: 0
From: Killeen, Texas
i have 4 low impedance 550's shoot me a PM in case you need them.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EfiniGirl
Haltech Forum
2
Sep 1, 2015 09:31 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM




All times are GMT -5. The time now is 10:56 AM.