13b sitting for a year
#1
Junior Member
Thread Starter
Join Date: Sep 2006
Location: Kamloops BC
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
13b sitting for a year
Hi
It looks like I’ve bought an 88 rx7 with a blown motor. The guy has another motor for it all most all back together. Just the clutch not installed. New rad and water pump.
The thing is it has been sitting for a year. Before I install the engine is there anything special I should do? Squirt some oil in the spark plug holes? Etc.
Any comments at all would help.
It looks like I’ve bought an 88 rx7 with a blown motor. The guy has another motor for it all most all back together. Just the clutch not installed. New rad and water pump.
The thing is it has been sitting for a year. Before I install the engine is there anything special I should do? Squirt some oil in the spark plug holes? Etc.
Any comments at all would help.
Thread
Thread Starter
Forum
Replies
Last Post
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM