13B-REW into a FC
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Location: Wisconsin
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
13B-REW into a FC
Im trying to figure out if anyone has done this and can shed some light on the swap. I know that the engine mounts are in different locations and what would solve this. I can only find 13B-RE mounting bracket adapters. Does anyone make them for the REW? Im guessing that stand alone is almost a "must have" when doing this. FMIC, single turbo, downpipe are all things that would probably have to be changed or upgraded to make time and money worth while.
If anyone has more information or ideas to make this a little more clear as to what I would need to do, please let me know. By replying on this thread or E-mail: Dhurito@yahoo.com or PM
Darin
If anyone has more information or ideas to make this a little more clear as to what I would need to do, please let me know. By replying on this thread or E-mail: Dhurito@yahoo.com or PM
Darin
#2
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Darin... You have to weld new engine mounting points on to the frame... People have done this swap.. but, obviously its not as easy as just buying adapters... REW mounts are located on the *** end of the engine, ours are located on the middle housing.
Thread
Thread Starter
Forum
Replies
Last Post
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM