2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

13b-re "serpentine" belt

Thread Tools
 
Search this Thread
 
Old 09-18-06, 12:36 PM
  #1  
slo
registered user

Thread Starter
iTrader: (1)
 
slo's Avatar
 
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes on 0 Posts
13b-re "serpentine" belt

I made no less than 2 posts with this question "where can I find a belt for the 13b-re to replace the main multi v belt"

well the awnser is napa part number NBH25050317 and NBH25050323
Old 09-18-06, 01:38 PM
  #2  
knowledge junkie

 
vaughnc's Avatar
 
Join Date: Mar 2001
Location: Atlanta, GA
Posts: 5,595
Likes: 0
Received 6 Likes on 4 Posts
I've rated/voted this thread as a 5 / excellent. Good info for others.
Old 09-18-06, 04:14 PM
  #3  
slo
registered user

Thread Starter
iTrader: (1)
 
slo's Avatar
 
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes on 0 Posts
I went to napa to buy the belt and found out that the 2 belts are different, one is slightly longer than the other, but both should be within the adjustment range of the alternator.

Bought the NBH25050323, in comparison to the original belt it is identicle. and fits well.
Old 09-18-06, 06:52 PM
  #4  
Junior Member

iTrader: (34)
 
dregg100's Avatar
 
Join Date: Nov 2004
Location: AZ
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
so this is to convert your v belt system to serpentine. of course you will have to buy the main pully and the alternator pully. what about the water pump? will an FD pull bolt up?
Old 09-18-06, 07:28 PM
  #5  
slo
registered user

Thread Starter
iTrader: (1)
 
slo's Avatar
 
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes on 0 Posts
so this is to convert your v belt system to serpentine. of course you will have to buy the main pully and the alternator pully. what about the water pump? will an FD pull bolt up?
No, this is the main serpentine replacment belt for the JDM only 13B-re that came in the cosmo. Many people on this forum have swapped in this engine. This post is directed at those who plan to or have done this swap.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Robrods64
New Member RX-7 Technical
6
10-02-15 07:56 PM
Turblown
Single Turbo RX-7's
1
09-30-15 05:58 PM



Quick Reply: 13b-re "serpentine" belt



All times are GMT -5. The time now is 10:37 PM.