13b-re intake manifold
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: East Coast
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
13b-re intake manifold
Hey guys. I have a 10th anniversary t2 motor and I want to put the 13b-re intake manifold on my car. My question is it it a direct bolt up? And does the upper intake to the 13b-re bolt up to any other specific lower intake manifold or does it only work with the 13b-re lower intake mani? Thanks
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,829
Received 2,597 Likes
on
1,845 Posts
no it doesn't bolt to the FC engine, or to the FC lower.
#3
Junior Member
Thread Starter
Join Date: May 2013
Location: East Coast
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
#5
FD Project
iTrader: (58)
You can have a t2 lower intake flange made and welded to the REW lim it will work as a transition and will make it a bolt on , it will add another 5/8" to the flange. The RE upper won't bolt to any other lim, the RE lim will bolt to a REW block but port on the REW block will ne to be port match as the re ports are bigger.
Thread
Thread Starter
Forum
Replies
Last Post
ladydoritopower
General Rotary Tech Support
1
03-13-16 04:34 PM
MattGold
3rd Generation Specific (1993-2002)
26
03-09-16 02:45 PM