2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

13b question

Thread Tools
 
Search this Thread
 
Old 07-19-07, 01:20 AM
  #26  
Junior Member
 
dragonforce's Avatar
 
Join Date: May 2007
Location: California
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Hey man welcome to the club!

Rx7 is such a good choice... if you have a job!

Seriously a job would keep thing running smooth like butter. If something breaks then just fix that **** up!

G/L
Old 07-19-07, 01:22 AM
  #27  
Rotary Freak

iTrader: (2)
 
MmSadda's Avatar
 
Join Date: Jul 2006
Location: Columbus, OH
Posts: 1,595
Likes: 0
Received 0 Likes on 0 Posts
sorry, we get a little flame-happy with noobs.

First off, let me tell you about my experience with my n/a 87 RX7. I bought it for $950, thinking it was a steal. turns out, it needed a rebuilt engine for $3500, and a new tranny for $600. now, I have over $5k in a car that shoulda cost me MUCH less.

point it, read up on your stuff before you make a purchase. and if you're serious about an rx7, GET IT COMPRESSION TESTED BEFORE YOU BUY!!! Preferably, buy one that someone has recently restored, or at least had the engine rebuilt.

As far as turbo vs. n/a, I HIGHLY recommend starting with an n/a; you'll learn all you need about the rotary, but without the potential reliability issues.

also, if you're going to drive any rotary-engine car, LEARN HOW TO PROPERLY MAINTAIN A CAR, oil and coolant changes, etc.

if you buy one, buy a Haynes manual so you can do your own repairs; it's a life-saver, as well as cash-saver.


good luck!
Old 07-19-07, 02:45 AM
  #28  
Senior Member

 
0verb00st's Avatar
 
Join Date: Jun 2007
Location: Seattle Washington
Posts: 598
Likes: 0
Received 0 Likes on 0 Posts
As many of you know, im in a similar boat as the main poster. Im 18, have a steady job at McDonalds (I get around 600 every 2 weeks) and have as of last pay check, around 1300 saved up. I still have an SRI off of my old car (a 240sx) that I can get around 100 for, so next pay check I should have around $2000. Im going to college (ACCEPTED AT WESTERN WASHINGTON UNIVERSITY!!!) this fall term, but am planing on having a job there, as well as looking for a place to work on my car. Do you think I should just keep saving and buy a tii (how much should I expect to pay) or buy a cheap n/a and have money to dump in it (suspension, exhaust, headers...maybe porting). Dont even try to talk me out of buying an rx-7 because I made up my mind and thats what im getting. The 240sx was an amazing car, but its turning into the civic...supras (mkiii) are nice but the rx-7 just drew me in and wouldnt let go, everything about the car is attractive, even it forcing me to work on it alot...
Old 07-19-07, 07:49 AM
  #29  
Rotaries confuse me

iTrader: (7)
 
My5ABaby's Avatar
 
Join Date: May 2006
Location: Murfreesboro, TN
Posts: 4,219
Likes: 0
Received 3 Likes on 3 Posts
Just get an N/A and keep it running. Don't worry about sinking money into it until you have money to spare. I've had my N/A since the end of high school and just graduated college in December. The only money I've put into it (for the most part), in four years, is maintenance. I have the stock busted *** suspension, no aftermarket gauges or anything along those lines, broken interior plastic, etc. But... I don't care.

I see people making just as much as I do, or less, that spend all their money on their cars. Sure, their cars are nicer than mine, but I'll be better off in the future. There's FAR more important things that I need to be investing my money into than a car. I'll have plenty of money to spend on my car after I get through grad school. For now, I'll invest my money in school and getting myself set up for the future.

I think it's stupid to suggest getting a TII (or upgrading an N/A) to people that make near minimum wage and will be having other expenses (college expenses in Overboost's case).

Last edited by My5ABaby; 07-19-07 at 07:55 AM.
Old 07-19-07, 11:40 AM
  #30  
Senior Member
Thread Starter
iTrader: (2)
 
0001tmn's Avatar
 
Join Date: Jul 2007
Location: North Carolina
Posts: 512
Likes: 0
Received 0 Likes on 0 Posts
lol thanks guys for all the help i'ma start lookin today and wont stop till i find one
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
9
05-11-20 10:04 AM
befarrer
Old School and Other Rotary
2
10-05-15 03:30 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
tonka_1956
1st Generation Specific (1979-1985)
1
09-02-15 05:55 PM



Quick Reply: 13b question



All times are GMT -5. The time now is 03:35 AM.