i just got my hybrid in and looking over it there's a few things wrong .. on the Compressor Housing there isn't a nipple to connect the waistgate so i guess im asking the guys who had this problem if you could tell me where i could run the line that runs from the waistgate.. another thing is the stock waistgate doesn't match the bolt pattern on the Compressor Housing is there another internal waistgate that i could go with that would bolt onto this to4b hybrid or is fabbing a bracket going to be the only option? thanks

pic of turbo ~~> http://i15.ebayimg.com/02/i/03/c2/d1/58_1_b.JPG

 

1. Drill and tap a hole for an elbow or bung

2. File the bolt holes on the wastegate mount to fit larger diameter if possible. If not, cut off and weld on T4 compressor clip thingy.