$2 Front lip project mounted. (pics!)
#1
XBL** Ownicus
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: St. Paul, Minnnesota
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
$2 Front lip project mounted. (pics!)
I snagged this lip off a 93-ish Protege at the wrecker's and it came out pretty decent.
It's a two part with a split in the middle so I joined the two halves, put some fiberglass cloth down to keep them together and filled in the curb rash spots. I then painted it with some of the low-gloss ceremic heat paint and it's resisting chipping pretty well so far.
The mounting was cake. I just drilled holes though the lip and into the buper while it was held up by masking tape and drove some fat sheet metal screws through. I then went along the back with some construction adhesive and it doesn't wobble or have any gaps.
It's a two part with a split in the middle so I joined the two halves, put some fiberglass cloth down to keep them together and filled in the curb rash spots. I then painted it with some of the low-gloss ceremic heat paint and it's resisting chipping pretty well so far.
The mounting was cake. I just drilled holes though the lip and into the buper while it was held up by masking tape and drove some fat sheet metal screws through. I then went along the back with some construction adhesive and it doesn't wobble or have any gaps.
#6
XBL** Ownicus
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: St. Paul, Minnnesota
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by s34n_sp3ch7
Nice Work!
Whered U get that from?
Whered U get that from?
Trending Topics
#13
XBL** Ownicus
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: St. Paul, Minnnesota
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys, glad you like it. It really does make it look so much more pissed off. Now I just need to finish the rest of my body work and find some aero flares.
Thread
Thread Starter
Forum
Replies
Last Post