The Wanks recent rebuild.
02-20-08, 01:02 PM
#1
The ***** recent rebuild.
Thought to post these cause it has been a while since my last build and I changed a lot on it since then. Popped the engine a few months back and just got it all back together.
Painted the engine bay Nobel White.
Painted a new sun roof and put it in. Mine has cancer BAD!
Rebuilt the block using new Housing and a Atkins 3mm overhaul kit.
Ported the Housings.
Added A Crane Hi-6 ignition system.
Added a Faurd Torrriius E-Fan from the wrecker, added a Adjustable relay.
Added a new Coolant overflow tank.
Re-routed my fuel system
Added a S5 Chrome Dipped Alt.
That is about it. It fires right up. I need to yank the turbo and tighten the water coolant inlet and move it a bit upright. Other then that, looking forward to getting it out soon. I will add some interior shots when it clears up. I have changed a lot in there as well.
Chris
Painted the engine bay Nobel White.
Painted a new sun roof and put it in. Mine has cancer BAD!
Rebuilt the block using new Housing and a Atkins 3mm overhaul kit.
Ported the Housings.
Added A Crane Hi-6 ignition system.
Added a Faurd Torrriius E-Fan from the wrecker, added a Adjustable relay.
Added a new Coolant overflow tank.
Re-routed my fuel system
Added a S5 Chrome Dipped Alt.
That is about it. It fires right up. I need to yank the turbo and tighten the water coolant inlet and move it a bit upright. Other then that, looking forward to getting it out soon. I will add some interior shots when it clears up. I have changed a lot in there as well.
Chris
Trending Topics
would be better if you make them bigger but is ok good job 10+
02-20-08, 01:29 PM
#9
Thanks for the cudos!
Chris
Last edited by The Wankler; 02-20-08 at 01:39 PM.
02-20-08, 03:33 PM
#16
Thank you all!
ePH C freak - it was down for about 6 months. I just took my time to get to the paint and then scrounge up money for the housing and rebuild kit. Now time for the exterior. If I had what you have into your, this would be a damn fine show car.
magus2222 - anytime. You can PM me on here if you know you are coming down this way. Another member lives close by, he has dropped a 20b in. Worth seeing for sure!
meteoro - I bought them from Jegs. They are all seperate parts. Sometimes they offer a package deal. The spark to the leading plugs is crazy. You do use your ignitor. You can see mine in the stock location. Looks different because I cut the little **** off itand painted THE OUTSIDE (Before I get flamed about grounding) black.
ePH C freak - it was down for about 6 months. I just took my time to get to the paint and then scrounge up money for the housing and rebuild kit. Now time for the exterior. If I had what you have into your, this would be a damn fine show car.
magus2222 - anytime. You can PM me on here if you know you are coming down this way. Another member lives close by, he has dropped a 20b in. Worth seeing for sure!
meteoro - I bought them from Jegs. They are all seperate parts. Sometimes they offer a package deal. The spark to the leading plugs is crazy. You do use your ignitor. You can see mine in the stock location. Looks different because I cut the little **** off itand painted THE OUTSIDE (Before I get flamed about grounding) black.
02-20-08, 10:32 PM
#24
FREEZING! North cal was going through a cold spell at the time.
Thick foam with that silver tape you use to seal heater ducts in your house. It forces the air through the IC and then the Rad instead of escaping through the sides.
Well, kinda why not, cover the ugly holes. I want to get The Wankler stamped in it. As well, it make removing the UIM a piece of cake, hot, cold, and keeps my prints off it.
I needed the satire, thanks!!!!!
Thanks for the compliments all! This forum made it possible for me to complete my car thus far.
