Post Some Pics of your FC! :D <- Pics of your car go in this thread!!
Fistful of steel
iTrader: (7)
Suspension is custom valved Fortune 510 coilovers, really happy with them.
Lightly built LS1 for power at the moment. Makes 401/401 at the tires currently. T56 trans, and Ford 8.8 center section.
I am going to redo the top end here soon with a Dorman LS2 intake manifold, 90mm TB, and NASCAR LS heads with titanium valves etc.
It is running a stock LS6 intake and stock 241 heads now, so it should pick up 40-50 WHP after the swap. I’m also going to get the new T56 Magnum F when it comes out in a month or two and sell my current T56.
Last edited by LargeOrangeFont; 08-08-19 at 01:05 PM.
The following users liked this post:
MrGoodnight (10-06-19)
Fistful of steel
iTrader: (7)
Yep that is going on as well! Been seriously lagging on the track time the last 18 months or so.
I was waiting for my friend to schedule time paint the car. He's retired and has access to an auto refinishing facility at a local Jr. College. He had the facility for a day, so we prepped and painted the car in a day.
Now I can get back out the the track, and often.
I was waiting for my friend to schedule time paint the car. He's retired and has access to an auto refinishing facility at a local Jr. College. He had the facility for a day, so we prepped and painted the car in a day.
Now I can get back out the the track, and often.
Last edited by LargeOrangeFont; 08-08-19 at 01:12 PM.
Fistful of steel
iTrader: (7)
[QUOTE=FC_DRFTR1;12363920]What are the wheel specs for this thing?
Likely 17x9 +22 all around, or 17x9.5 +38 all around. Both will fit under stock fenders with coil overs and a front fender roll.
If 18s they could be 18x9 +35 with a spacer or 18x 9.5 +38.
Likely 17x9 +22 all around, or 17x9.5 +38 all around. Both will fit under stock fenders with coil overs and a front fender roll.
If 18s they could be 18x9 +35 with a spacer or 18x 9.5 +38.
Last edited by LargeOrangeFont; 08-11-19 at 12:11 AM.
The following users liked this post:
Relisys190 (08-19-19)
The following 3 users liked this post by rcjstevens:
Full Member
Mariah Widebody Photos of my car
Here are some photos of my 19897 FC Turbo Rx7 at recent shoot by Super Street.
http://www.superstreetonline.com/fea...a-rx-7-mariah/
http://www.superstreetonline.com/fea...a-rx-7-mariah/
The following users liked this post:
Relisys190 (08-29-19)
Tear you apart
iTrader: (10)
Here are some photos of my 19897 FC Turbo Rx7 at recent shoot by Super Street.
http://www.superstreetonline.com/fea...a-rx-7-mariah/
http://www.superstreetonline.com/fea...a-rx-7-mariah/
The following 2 users liked this post by djSL:
DD69 (04-30-20),
Relisys190 (08-29-19)
The following 2 users liked this post by MazdaRX7FC3S:
DD69 (04-30-20),
Relisys190 (08-31-19)
The following users liked this post:
DD69 (04-30-20)
The following 2 users liked this post by Niyeaux:
DD69 (04-30-20),
troutster52 (10-07-19)
The following users liked this post:
cooliomo (04-27-20)
80's vibes
iTrader: (1)
Well welcome back then man that Volvo lip still looks so damn good on an S4. Car like this actually reminds me of an old Canibeat item that I had as a desktop for ages.
The following 2 users liked this post by Mazdarian:
DD69 (04-30-20),
ROTARYLiFE7 (10-31-19)
The following 2 users liked this post by Relisys190:
troutster52 (10-12-19),
TurboFig (10-23-19)
The following users liked this post:
Relisys190 (10-25-19)
The following users liked this post:
Relisys190 (10-15-19)
Rotary Enthusiast
iTrader: (5)
Junior Member
The following users liked this post:
troutster52 (10-23-19)