Post Some Pics of your FC! :D <- Pics of your car go in this thread!!
Work Equip 05, I wish mine were as deep as Zenki FC3S but these are fine for the street car. The race car is going to have the Enkei NT03+Ms for the track and maybe some serious lip when the wide body is on.
Here's another picture of the front with the cap on (they still need to be cleaned up a little!)

17x8/9 (not sure of offset because sticker was faded) + 25mm adapter so they could clear the front brakes. BC coil overs maxed out on neg camber in the front and just yesterday I installed a TC Sportline rear camber link so I could adjust the rear. It helped. I'll take another picture later.
nice! how was the fuel tank?
^^ i feel ya. when i bought my t2 with a blown engine, the owner said it was sitting for a "couple years". i came to find out through the insurance agent that it hadn't been insured in over ten years. the pump was a huge glob of varnish. the varnish on the inside of the tank was so hard and crusty, i thought it was rust. i soaked it in acid dip and pressure washed the hell out if it. came back minty!
gave me the worst migraine i have ever encountered though.
gave me the worst migraine i have ever encountered though.
Attachment 520271
Me (on the left) with brothers little and big. Not visible are my awful 17" Tuscani wheels. Looking to replace them...thinking 15x7 or 7.5s maybe 15x8s in the back. Anyone have any suggestions? I might settle for 16s if they looked really good
Me (on the left) with brothers little and big. Not visible are my awful 17" Tuscani wheels. Looking to replace them...thinking 15x7 or 7.5s maybe 15x8s in the back. Anyone have any suggestions? I might settle for 16s if they looked really good
i'd post some pics, but the car is gonna be on jacks for a little while longer here. once it's all back together i'll post some pics.
















