PBMs as in the coilovers? and if so are you planning on drifting it?

 

White s4 Tii- Demon721
Red s5 n/a- mine ( now lowered, traded that civic for the, needs a little work,
its untouched for the most part)
black s4 Tii swap- mine (needs work again

 

FlavorSavr, that's a real beauty you've got there!

 

Do I see a rare s4 3 piece front lip?

 

New rear bumper. Gap will be fixed, it was real late. Also i really like MACs car a lot and this ^^^^T2 right about me. Nioce!

 

anyone know how to get dumbass lens spray off of perfect s5 tails??

lowered!!!

 

slapped on some RE-A mirrors today.. now gotta get some tires for the new wheels... and some coilovers...

 

A bunch of good looking FC's

 

ROD try using acetone should take it right off. much easier than wasting 4 hours wet sanding it off.

 

acetone WILL melt/soften the lens

 

thats news to me. i guess i got lucky with my old car then

 

Yeah pbm coils, and yeah I planned on just making it a all around fun car to drive.

 

i tried spraying my corner lenses red on the tail lights and it just came out smoked before, so i took some paint thinner and it took it right off, try that. Though it was just a few hours dry and not days.

 

FlavorSavr if your interested in selling the sport aero lip, let me know.

 

please dont use acetone! someone once told me the same thing to get overspray off my gauge cluster on my gsxr from the previous owner. now its hazy and pitted
start with paint thinner and if that wont do it get a bucket with some water, some 220 grit and a comfy stool and have fun!

 

220? Bit harsh dont you think? Maybe 1000 grit? It'll take a little longer but it wont leave the deep groves like the 220.

 

i actually meant to type 320 but that could be a bit harsh i suppose. as long as you have a good buffing wheel and the right compound it should be fine

 

k, ill try a little thinner, see how it goes.
def wont touch acetone, thanks for the advice anyway, but i've personally f-ed up
plastics using that stuff.

and if the thinner wont work then ill sand paper.
thanks guy!
will post results!

 

more pics less chit chat, you can PM each other : )

 

I stand corrected, sure enough I tried it today on a s4 lens I have and it didnt melt, you would think I would know being that I have a 55 gallon drum of the stuff here. Might have been laquer thinner I had used once and it softened a bit, but I dont remember it was like 12 years ago!


gauge cluster- definitely it will as you found out

 

Back on topic... Almost done with the turbo swap...

 

nice and clean

 

Here are a few pictures of my beloved ride.

 

Nice RX-7 man, looks good

 

$10 says RRTEC doesn't keep the car