|
Post pics of your proud parts!
I was just wondering what everyone is hording out there... :D
I know a bunch of you are sitting on some rare and expensive stuff, so let's see it! (Anyone own that HKS T51R SS turbo exhaust manifold that was on eBay???) There's pics posted here and there, but I'd figure why not consolidate it so everyone can go Uuuuuuuuu and Aaaaaaaahhh in a single thread! -Ted |
Everyone has probably seen this before:
http://www.aaroncake.net/rx-7/pictur...eccentric1.jpg http://www.aaroncake.net/rx-7/pictur...eccentric2.jpg Not particularily expensive, but rather rare and unique. This isn't really a "part" per say, but it's rotary and very rare. My 1976 RX-5 Cosmo. 13B 4 port, Nikki, etc. http://www.aaroncake.net/misc/RX-5%2...ger%20Side.jpg http://www.aaroncake.net/misc/RX-5%20Interior2.jpg http://www.aaroncake.net/misc/RX-5%20Engine.jpg |
ill add a couple...cusco door bars, genuine mazdaspeed oil cap, and inifni strut tower bar
http://i30.photobucket.com/albums/c3...s/DSC01461.jpg http://i30.photobucket.com/albums/c3...s/DSC01463.jpg |
|
1 Attachment(s)
J-spec digital AC logicon...
(I gotta go dig up everything else and take pics. :P ) -Ted |
nice love 2 replace my logicon with the digital..i dont have anything rare besides my front s5 lip from drezeldee think thats his name..only a couple of us have it and contors the s5 bumper perfectly..
|
Originally Posted by Aaron Cake
(Post 8197151)
4 rotor eshaft
Keyed in the middle right? That will be an interesting engine to assemble. |
moar!
|
I don't have anything rare. Except Battle Version Toe Rods.
|
Here's my stuff:
Had these in the car http://i114.photobucket.com/albums/n...s/DSC03426.jpg Then I replace the Mazdaspeeds with these RE Amemiya seats http://i114.photobucket.com/albums/n...s/DSC03551.jpg http://i114.photobucket.com/albums/n...s/DSC03550.jpg I have collected these over the years as well http://i114.photobucket.com/albums/n...s/DSC03465.jpg I have more stuff but in the process I managed to drop and break the camera...soo yea... Enjoy |
Originally Posted by RETed
(Post 8197864)
J-spec digital AC logicon...
(I gotta go dig up everything else and take pics. :P ) -Ted |
Originally Posted by CWestFD3S
(Post 8198085)
I have collected these over the years as well
http://i114.photobucket.com/albums/n...s/DSC03465.jpg Willing to sell the blue one??? I've got a green one myself and two green horn buttons, but I've found the blue version is harder to find of all three colors. Seen a lot of red ones, but red is not my color... -Ted |
Originally Posted by 87 t-66
(Post 8198163)
does it actually work though?
If you're asking if it's plug-n-play...not even close. I'm going to track down the wiring diagram and see how much of it can be spliced in. Luckily, my unit came with cut plugs, so I know the wire colors. Some of the wire colors are identical, but I cannot confirm I can just splice them in. I would imagine there's a different sub-harness, as I wouldn't think Mazda would design a totally new dash harness just to use this thing. There's a nice write-up somewhere in here that goes into a little detail about how it all works. There's a temp sensor that unique to this system. This is not a priority to figure out anytime soon, but I'll work on it eventually. :) -Ted |
Never mind! :D
|
|
RETed: Sorry man, the blue is my favorite. It took me almost 4 years to track that down. I feel you on the red...its definitely not my favorite color but since I have all 3 its kinda like the complete set. I have another red one that I use to daily on my car but I'm looking to get another black one.
trueimport: I do still have them however since the RE seats are pretty much the same seat but recovered I used the mounting brackets. I have another set of Mazdaspeed mounting brackets for the FC but I think they are for the Type F seats and not the Sports Seats. |
Got this old school RE-A shift knob from 87GTR last year:
Crappy pic, haha! http://i55.photobucket.com/albums/g1...I/IMG_0383.jpg I liked my weighted ball knob better, but this knob is just too cool to replace! |
Originally Posted by CWestFD3S
(Post 8198245)
RETed: trueimport: I do still have them however since the RE seats are pretty much the same seat but recovered I used the mounting brackets. I have another set of Mazdaspeed mounting brackets for the FC but I think they are for the Type F seats and not the Sports Seats.
|
trueimport: pm me and maybe you can convince me to part with them
|
8" wide BBS gold meshies
http://photos1.blogger.com/x/blogger...90219/rx30.jpg I got this cool Devil's Own tank. The pump mounts on the tank, and the tank fits perfectly in the rear bin!! http://bp2.blogger.com/_AEAL2Ej4Lgw/...s400/rx185.jpg I've always liked the fact that I switched out my S4 grey interior for a S5 black. I still need some better seats and need to spray the demister vents. Before http://photos1.blogger.com/x/blogger...1225/rx2_3.jpg After http://bp1.blogger.com/_AEAL2Ej4Lgw/...s400/rx145.jpg |
|
1 Attachment(s)
Metalit high flow, metal substrate cat from Japan...
Drop in replacement for stock main cat -Ted |
infini iv strut brace-
http://i271.photobucket.com/albums/j...Mybay-Copy.jpg infini seats- http://i271.photobucket.com/albums/j...DSC00490-2.jpg carbon-fibre sunroof- http://i271.photobucket.com/albums/j...DSC00517-1.jpg 17x8 inch forged alloy SPARCO VIPERS- http://i271.photobucket.com/albums/j...T/DSC00921.jpg Dont know if these are rare for u guys in the states but these RX-7 foot pedals are rare here in Australia- http://i271.photobucket.com/albums/j...T/DSC00484.jpg http://i271.photobucket.com/albums/j...T/DSC00485.jpg |
Found some pics I took awhile back of some stuff:
Auto EXE/ Gruppe M intake HKS top mount RE Amemiya Strut tower bar & 9mm race plugs http://i114.photobucket.com/albums/n...s/DSC03399.jpg RE Amemiya Canards, Turn signals, Mirrors, wing, and rims http://i114.photobucket.com/albums/n...s/DSC03546.jpg RE Amemiya Oil filler cap http://i114.photobucket.com/albums/n...s/DSC03503.jpg Front bumper, Side skirts and diffuser are Shine Auto |
Cwest, we should build an fc chuck full of rare parts! I'm down if you are!
|
|
1 Attachment(s)
I dont think they are rare by any means. 88' vert wheels, also have a 4 bolt spare tire that doesnt seem to have been used. Maybe once or twice. I am the 3rd owner of my car, the previous owner bought the car in 1991, the car didnt have a spare so the dealership tried to sneak in a 4 bolt spare, the owner made them aware it needed the 5 bolt pattern. they found him a 5 bolt spare and told him he could keep the 4. i also have the center cap wrench.
|
Originally Posted by RETed
(Post 8198209)
No...not yet.
If you're asking if it's plug-n-play...not even close. I'm going to track down the wiring diagram and see how much of it can be spliced in. Luckily, my unit came with cut plugs, so I know the wire colors. Some of the wire colors are identical, but I cannot confirm I can just splice them in. I would imagine there's a different sub-harness, as I wouldn't think Mazda would design a totally new dash harness just to use this thing. There's a nice write-up somewhere in here that goes into a little detail about how it all works. There's a temp sensor that unique to this system. This is not a priority to figure out anytime soon, but I'll work on it eventually. :) -Ted i know its not plug and play or i would have bought that a year before you ;) i have a pretty good eplanation of the whole system and what is needed to make it work if you want it...i dont have a/c in my fc's |
Originally Posted by 13btII
(Post 8198520)
Installing soon!!!
http://i79.photobucket.com/albums/j1...Picture039.jpg http://i79.photobucket.com/albums/j1...Picture175.jpg http://i79.photobucket.com/albums/j1...Picture115.jpg http://i79.photobucket.com/albums/j1...Picture048.jpg |
red_S5_fc3s: I'm down...you know I have enough parts to build another fc...lol
|
BBS Stern wheels, made in Japan in the 1990s. Super rare.
http://www.jimmylin.info/cars/7/IMG_1787-1024x768.jpg |
my 2 rarest parts,...not that rare though.
Mazdaspeed MS01 17x8, 17x9 http://www.777kb.com/vimg/mazdaspeedfelgen126.02.08.jpg and oldschool Knight Sports Boost Gauge http://pics.shadyracing.net/albums/u...ightsports.jpg |
|
I would actually go from a 5 lug to 4 lug, just because the wheels are cheaper. That is pretty unique there Aaron Cake.
|
That looks familiar.
I was proud of those too :D
Originally Posted by Turbo II Rotor
(Post 8199293)
I see your turbo and raise you,
http://i79.photobucket.com/albums/j1...Picture115.jpg http://i79.photobucket.com/albums/j1...Picture048.jpg |
Originally Posted by red_s5_fc3s
(Post 8200091)
I would actually go from a 5 lug to 4 lug, just because the wheels are cheaper. That is pretty unique there Aaron Cake.
|
Lately it seems that it's much easier finding really nice 4 lugs, than it is finding a decent set of 5 lugs. I've got to see what kind of wheels you've got!
Brand New Switches are pretty rare http://i35.photobucket.com/albums/d1...2/IMG_2968.jpg http://i35.photobucket.com/albums/d1...2/IMG_2967.jpg RE Amemiya Strut Tower Bar http://i35.photobucket.com/albums/d1...2/IMG_1824.jpg FEED Strut Tower Bar http://i35.photobucket.com/albums/d1...2/IMG_1862.jpg RE Amemiya Spark plug wires. (they used to be hard to get until they popped up on ebay and corksport) http://i35.photobucket.com/albums/d1...2/IMG_1817.jpg JDM FTPs. (It's really the only picture I have of them) http://i35.photobucket.com/albums/d1...2/IMG_2832.jpg JDM Bubble lenses (not rare, but hard to get) http://i35.photobucket.com/albums/d1...2/MVC-106S.jpg RE oil cap http://i35.photobucket.com/albums/d1...2/IMG_2866.jpg Safety 21 roll bar. (not really rare, but not a whole lot of people have it.) http://i35.photobucket.com/albums/d1...2/IMG_2534.jpg I've also got an old school RE Amemiya boost/vac gauge and RE Amemiya Power Aero mirrors not pictured. CWestFD3S and I are JDM Parts Whores! |
I'm in. I'll see your turbo set up and raise you 2-stage AI
http://bp1.blogger.com/_AEAL2Ej4Lgw/...s400/rx177.jpg http://bp1.blogger.com/_AEAL2Ej4Lgw/...s400/rx174.jpg http://bp0.blogger.com/_AEAL2Ej4Lgw/...s400/rx175.jpg http://bp2.blogger.com/_AEAL2Ej4Lgw/...s400/rx190.jpg |
Some big turbos are being thrown around here!
|
maybe not rare but hard to come by with
JDM bubble side markers along with LED JDM FTP's http://i260.photobucket.com/albums/i...23_fixed-1.jpg Staggered 16X8 rear 16X7 Front 5 lug Watanabe RS-8 two piece wheels (very light) http://i260.photobucket.com/albums/i...n/DSC00378.jpg Old school Nardi Steering wheel (never seen this specific model) http://i260.photobucket.com/albums/i...n/DSC00379.jpg RX-7 memorial book (expensive and hard to get) http://i260.photobucket.com/albums/i...n/DSC00383.jpg |
Aaron can you elaborate a little more on the brake setup(how is done)do you mind to share?
|
Originally Posted by shadow7
(Post 8200694)
Old school Nardi Steering wheel (never seen this specific model)
http://i260.photobucket.com/albums/i...n/DSC00379.jpg http://www.jimmylin.info/cars/7/FC3S-142.JPG |
[QUOTE=JYM;8200723]I have the same wheel, just in a different color. Didn't think it was really rare.QUOTE]
you said it yourself........(different color).....sometimes the color separates rare from the unrare |
Originally Posted by 87 t-66
(Post 8199180)
i know its not plug and play or i would have bought that a year before you ;) i have a pretty good eplanation of the whole system and what is needed to make it work if you want it...i dont have a/c in my fc's
edit: here.. http://www.jrcormier.com/prelude/jdmclimatecontrol ^ sorry thats off topic but I don't have anything "rare" except a working sunroof. lol |
Originally Posted by BLK FC3S
(Post 8200807)
^ sorry thats off topic but I don't have anything "rare" except a working sunroof.
|
|
|
|
Originally Posted by Turbo II Rotor
(Post 8201029)
|
Originally Posted by Turbo II Rotor
(Post 8199293)
I see your turbo and raise you an S480 and a set of PP housings :wink: http://i104.photobucket.com/albums/m...7/turbo1-1.jpg http://i104.photobucket.com/albums/m...ip7/turbo4.jpg http://i104.photobucket.com/albums/m...7/P3140209.jpg http://i104.photobucket.com/albums/m...7/HPIM3214.jpg |
| All times are GMT -5. The time now is 04:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands