Pictures of FC wheel fitment with specs... ***Picts-n-Specs ONLY***
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
Pictures of FC wheel fitment with specs... ***Picts-n-Specs ONLY***
f- 16x8 +30 Japanese 2piece Hero's racing, 20mm over fenders
r- 16x8 -15 Japanese 2piece Demon cambers, ??mm over fenders(forgot)
r- 16x8 -15 Japanese 2piece Demon cambers, ??mm over fenders(forgot)
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
BoostinmyS5
18x10-6
19x10-16
other wheels are:
17x10-2 front (20mm spacer) under 25mm wide fender
18x10.5-5 rear (20mm spacer) under 50mm wide fender
18x11-9 work meister (no spacer)
18x10-6
19x10-16
other wheels are:
17x10-2 front (20mm spacer) under 25mm wide fender
18x10.5-5 rear (20mm spacer) under 50mm wide fender
18x11-9 work meister (no spacer)
Last edited by PlatinumPresto.info; Oct 21, 2007 at 10:42 PM.
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
demontwig
Zenneti aluminum wheels with Falken ZE512 235/45/z18 8.5 front 265/45/z18 9.5 rear with 25mm spacers up front. Stance GR coilovers. A little bit of rubbing when turning too sharp, but otherwise fit fine.
Zenneti aluminum wheels with Falken ZE512 235/45/z18 8.5 front 265/45/z18 9.5 rear with 25mm spacers up front. Stance GR coilovers. A little bit of rubbing when turning too sharp, but otherwise fit fine.
Trending Topics
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
unicorn_squad
18x9.5 + ~ 12 with 215/35
18x10 +2 with 225/40
18x9.5 +22 with a 225/40 tire. on the front
18x9.5 + ~ 12 with 215/35
18x10 +2 with 225/40
18x9.5 +22 with a 225/40 tire. on the front
Last edited by PlatinumPresto.info; Oct 21, 2007 at 11:25 PM.
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
azncmb
wheels: work vs-kf
size:
F- 18x9.5 +7(effectively +0 with 7mm spacer to clear caliper).
R- 18x10 +7
tires:
F- 225/40/18 Federal ss595
R- 235/40/18 Federal ss595
stock fenders, with a a roll/pull in the rear...
^^sheet of paper clearence between caliper and wheel spoke
^^
wheels: work vs-kf
size:
F- 18x9.5 +7(effectively +0 with 7mm spacer to clear caliper).
R- 18x10 +7
tires:
F- 225/40/18 Federal ss595
R- 235/40/18 Federal ss595
stock fenders, with a a roll/pull in the rear...
^^sheet of paper clearence between caliper and wheel spoke
^^
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
hurleysurf24
Wheels are
17 x 8 - 32 offset
17 x 9 - 32 Offset
225/45/17 on the front
245/40/17 on rear
275/40/17 were rubbing against the mufflers of my racing beat exhaust .. even after the shield was bent. 255/40/17 will make the rears look more flush with the fender.
17 x 8 35offset on the front
Wheels are
17 x 8 - 32 offset
17 x 9 - 32 Offset
225/45/17 on the front
245/40/17 on rear
275/40/17 were rubbing against the mufflers of my racing beat exhaust .. even after the shield was bent. 255/40/17 will make the rears look more flush with the fender.
17 x 8 35offset on the front
Last edited by PlatinumPresto.info; Oct 21, 2007 at 11:22 PM.
Thread Starter
Banned. I got OWNED!!!
Joined: Oct 2007
Posts: 224
Likes: 2
From: Pon De Beach
RETed
17" x 8.0", +35 wheel
On stock-type shocks, the lower spring perch will interfere with 225 / 235 wide tires.
There is no way it's going to fit without hitting the lower spring perch.
17" x 8.0", +30
235 / 45 / 17 tire
17" x 8.0", +35 wheel
On stock-type shocks, the lower spring perch will interfere with 225 / 235 wide tires.
There is no way it's going to fit without hitting the lower spring perch.
17" x 8.0", +30
235 / 45 / 17 tire
