Msports ftw

 

Lol the visor was on the car when I bought it, never seen another fc with the same one. Its the same material as the cheap double sided tape on rain visors. Ive come to the conclusion that its from another car (maybe integra) since it doesnt fit the car 100%.
They are varrstoens, thanx!

 

17x9 +15 all around. sitting 4x4 status right now because I had to use a crappy uhaul trailer to take it to the track last weekend. better pics will come once its sitting right.

 

I'm so jealous of those wheels!

 

thanks man! they are nothing special tho, thinking about picking up another set so I dont have to rock fugly *** drift spares out back

 

Ahhh you removed a collar. I went to sag mine and only got about a half inch before everything was maxed. I might take out a collar if I get bored of it and want to go lower but for now I think I'm happy.

 

mxrider914: what spacers and tire size you have?

 

205/50 front 205/55 rear. No spacers.

 

It doesn't rub in the rear? Also your fenders rolled?

 

No rubbing in the rear. When I get rid of the camber it might. Fenders are rolled half-assed with a jack handle and then I took the front fenders off and used a hammer to flatten the lip more. Front still rubs in hard corners pretty bad, like steering wheel getting yanked out of your hands bad, once I put my t2 brakes on and the 5mm spacer to make them fit I'll probably have to pull the fenders and/or raise the car. I'm not a 100 percent sure the fender hitting is the big issue though, I think it might also be hitting the top of the wheel well.

 

Well finished one side . The wheels are are 15x8' with a offset unknown but from rough measurement I've taken I'm guessing around a -6 -10 all round with my 1/4 spacers to clear the calipers . Need to get 1/2 spacers for rear to bring them out a lil more I feel Or maybe just zero camber back out .Fronts are perfect I think .
205/50/15's all around

 

Sneak peek! More to come soon!

 

I know you havent posted on here the photo shots you did. But your **** is all over instagram! The whip is fire!!

 

For real? I don't have instagram but my friend that does my photos did all that. I posted a few pics on a thread I started. Thanks bro!

 

Enkie rpf1s 17x9 +22 235 40 advan ad07s square
I've been smilin ear to ear, love dis ish

 

What tire size's are you running GREENRX8?

 

215/40... I want to bump it up to a 225 or 235/40 tho

 

Sorry for flooding!

I think i posted the specs before, but if not, 18x10 +14 (F), 18x11 +8 (R)

 

RTY - ***** fire! Are those stock fenders in the front? What tire size are you running?

 

Thanks bro! Nah those fronts are 30mm shineauto ventless overs. And I'm running a 215/40 front and 235/40 rear nitto neo gens.

 

215/40, DAYUM! Im trying my hardest to fit x10 in the front on stock fenders.

 

you'll have to notch your coils to do more camber, i attempted on my first set of wheels (the saleens), and you can do it, with a big stretch, and lots of camber and an aggressive pull.

 

My plan is for a low enough offset so I don't have to touch the coils. I'll also be working with extended LCAs to help out a bit also. Just doesn't seem like anyone likes running dumb sizes on this site. lol

 

is this a dumb size lol 26x10.5x15 mickey thompson et streets i think its about 255/60/15 on some 15x8 +25 jeep wheels, riding like a 4x4 on pbm coilovers

 

I was interested in extending my LCAs but I couldn't find any info on it for FC's. So, if you do it, PM me some info. I'm not very good with fabbing like that