I did my wheels black. My car is black so it looks pretty dope, but it doesn't last very long and isnt that durable.
It's really a waste of time if you ask me. Maybe on a show car that never saw the road?
I would rather wrap it in vinyl.

If I can get some in lil ole nz cheap enough might do my rwd 323 wagon army green. So weird I've never heard of this before being a panel beater

I did my wheels in red earlier this summer. It looked ok and was something different but it started to peel off the spokes so I took it off. It came off alright but I didn't get it thick enough in some areas because it doesn't want to come out of the little nooks in the wheels. There's still some on the fake three piece screws and in the lug nut holes that I'm too lazy/dont know how to get out... I would advise anyone who is planning on doing this to make sure not to get over spray on anything. If its thick enough to peel off its easy to remove (4-5 good coats), anything thinner is a pita to get off.

Attachment 694296

[QUOTE=Primos003;11259640]I did my wheels in red earlier this summer. It looked ok and was something different but it started to peel off the spokes so I took it off. It came off alright but I didn't get it thick enough in some areas because it doesn't want to come out of the little nooks in the wheels. There's still some on the fake three piece screws and in the lug nut holes that I'm too lazy/dont know how to get out... I would advise anyone who is planning on doing this to make sure not to get over spray on anything. If its thick enough to peel off its easy to remove (4-5 good coats), anything thinner is a pita to get off.

Attachment 694225[/QUOTE/]

your car + meshies=:boink: pure sex!:)

Im not going to try this on the outside of my car but hows this stuff on our old britle dash pieces? Would it work?

I've seen ppl do it right and pressure wash there cars and nothing happened I've seen it last for 2 years maybe more you need to buy the spry gun not spray cans.....imo

Wow that looks fucking awesome. But the red looks more of a orange hue.

I did my wheels on my daily they look awesome and its held up really well. I really can't complain about blacking out my wheels for $15.

I'd do it again in a heart beat. Actually I want to do my FC wheels in red as well.

got the dip just been swamped with work! hope to get a start with my day off tomorrow!:)

^im stoked.

I did it!!!!:)
 

well its not finnished but a little work on the hood and ill be done not to bad! its gripping!! heres what I got!:) I ran out... its dark so ill post some more pics tomorrow!
Attachment 480109

Red looks good^

well if u ever wondered what your fc would look like in dip! here ya go.. im satisfied now its all one color looks pretty sweet! this is right after some touch up so still wet in a few spots!:blush:

Attachment 480311

Attachment 480312

Attachment 480313

Attachment 480314

Not bad at all. Did u use the cans only? How much total did it cost for what u used

I used 7 tubes of the straight dip and two aerosol cans on the hood! I say use the tubes and a sprayer they work the best! I used paint thinner, just a little over half and half it hides bilimishes very well, im going to do another coat later and redo the hood.. but im satisfied I didnt wanna sand off the original paint.. so this worked out great!
oh and it was $55 bucks for 7 tubes at home depot! 14 oz tubes.. so sprayer and all I got $110 in it..:)

Sorry to bump this. Figured id post my car and 2 cents. did mine with rattlecans and plan to redo it and my s14 with the pro kit. its durable as fuh if you let it cure. Ive hit cones and ripped of my bumper with minimal damage to the dip.
http://m234.photobucket.com/albumvie....jpg.html?o=31

http://m234.photobucket.com/albumvie....jpg.html?o=21

shits fine. get some cans and test it on something
first before you buy the pro kit.

i fix link for you
http://m234.photobucket.com/albumvie....jpg.html?o=31

http://m234.photobucket.com/albumvie....jpg.html?o=21

maybe not...

Thanks for tryin barkz <3 My phone was being a pos. Heres the full pics.

Attachment 690896

Attachment 690897

Attachment 690898

All via rattlecans. Cant wait to order the pro kit and try out that nifty lookin sprayer. Pretty sure the FC is doable with 1.5 gallons or so give or take. Was reading up on a guy who purchased the pro kit for his FD and managed to get a perfecto paintjob with that amount.

Yea they do that.. Thats why they never get caught

they actually get away quite a bit. I live in long beach, and i've seen plenty of people get away. shit my own dad has gotten away at least 15 times, although one time he was ripped to shreds and de-clothed under a house :lol: and as a matter of a fact, today is the day he gets out! funny coincidence.

not saying getting away is cool or anything, but it's definitely possible.

finally some pics!:) yeah im ripping my hood off and redoing it and putting another coat on with the rattle cans.. if u get your spray pattern right they look better than the sprayer in my opinion..




lmao:lol: congrats!!

I did a buddies of mines gmc truck a few days ago with the cans and like it better than my car I did with the gun! we ran out on the hood.. but imma get some cans and add another coat to the 7!

Attachment 482233

doing my 87 in matte white. pics soon. ish..:egrin:

I may do this too.The body is not "good enough" to get 3k in paint.I would rather Plasti-dip and make it look better for the lower price.

Im looking forward to seeing a matte white plasti dip fc!

Attachment 689163

Attachment 689164

Attachment 689165

little late to the party but heres mine