Exceptthe black one that its advertised on...I would appreciate it thanks

 

Feed lip. (to me, thats what I see.)

 

feed? what do you mean? and i asked for any other ones except this one thanks tho!

 

uh... Listen, Im trying to help you out. People need to see SOME idea of what your talking about.

That thing looks like a FEED/Odula front lip.

 

the chargespeed, feed, and odula lip all look really similar.

 

where do I buy a real feed lip or the chargespeed lip? (I know I'm thread jacking but screw it)

 

fujitaengineeringusa.com or rhdjapan.com

 

i have the odul, looks exactly the same


link is in my sig in my build thread.

 

thanks!! appreciate it..its expensive but ima get that lip

 

Shine also has a similar lip. http://www.shineautoproject.com/type1fc.htm


Looks like this. (Not my car)

 

this is from corksport what i dont like is you have to cut the stock bumper so that it looks nice. dose shine's have a gap?

 

you dont HAVE to cut the bumper for the lip to look better, but it allows MUCH more air flow if you have a FMIC

that is my car in the corksport picture

 

No gap on the shine lip.

 

there is no gap on the corksport lip either

 

fixed!


http://www.corksport.com/corksport-o...p-spoiler.html
it being the Odula ("Odura" when said with a japanese accent) lip replica, i'm sure they wanted to leave the gap. Boost Lee from Washington has the same lip.



rommel from the west just sold the same lip recently.
http://www.shineautoproject.com/type1fc.htm
Shine Auto Project lip (FEED/Chargespeed replica)




http://www.odula.com/page/fc3s_l_spoirer.htm
the Odula lip


http://www.chargespeed.com/english/rx7-fc3s-e1.htm
the Chargespeed lip (looks very similar to FEED)


http://www.fujitaengineeringusa.com/fc3s.html
the FEED lip (much like the Charge Speed. almost thinking that Charge Speed is a replica company)

that being said, Odula and Corksport have the gap (for large FMIC applications and where most people cut the grill and bottom of the bumper), while Chargespeed, FEED, and Shine Auto has none.

i remember somebody selling the Charge Speed lip before... i'll try to find the thread sometime.

 

Rishie had a Charge Speed lip.

https://www.rx7club.com/showthread.p...hargespeed+lip

 

here's the thread i was looking for with the pic.

https://www.rx7club.com/showthread.p...hargespeed+lip

 

then shine has a gap as well, I thought by gap he meant where it lines up on the sides with the bumper

I think it looks kind of funky with NO gap

 

nope. shine has no gap.

if you see the thickness difference on the middle of the lip, the odula/corksport one is thinner than shine auto/FEED/Chargespeed.

 

no gap looks funny on that red car, with the black you dont notice it as much, at least in those pictures.

When I closed the gap in the car a good 10 degrees hotter with a FMIC, on a car without the FMIC I dont think its a issue



whatever lip this is I see a gap, I can see the asphalt between the lip and the bumper

 

 

no gap

 

lol thats my car and there is no gap in between the lip and the bumper.

 

Sure enough, no gap. I lightened this picture in an attempt to prove there was a gap.

 

sorry the dirt looked like the asphalt

even finishline with his facepalm has to admit that is what it looks like

still think it looks odd