I am looking for pictures specifically with this:

1. Must have vert wheels, state the wheel size as well.
2. Must be lowered, coilovers or springs, please state how much the drop is if possible.
3. If spacers were used, what thickness did you use.

I request this, because I would like to know what this looks like with different setups.

I will be using Tien Type HR coilovers and some kind of spacer, probably Powered by Max spacers.

 

um, vert wheels are only 1 size. 15x6 i do believe.

Lloyd

 

Oh crap, I feel like an idiot, I meant tire size not wheel size, my bad.

 

Here you go:




In these pictures I had:
225/50-15s
coilovers adjusted to put the top of the tire level with the fender (don't know the drop)
30mm spacers in the rear and 25 up front.

 

that looks great ^

 

205/60 all around.
5mm spacer in the front.
drop is barely where the tire meets fender.

 

your front fenders rolled??

 

That tire and wheel spacer combo is rediculous, geez... I think I have read somewhere that the front has a little rubbing. So far I'm looking at 15mm spacers in the front and 25mm or 30mm in the rear. can we get any close ups of the front and back?

 

My front fenders were not rolled, and I did experience occasional rubbing.
I had it like that for a short period of time and then pulled the spacers off the front. You could run that combo with a fender roll or narrower front tires. I was going to get 15mm spacers but I think you would have to go slip-on and lengthen the studs (because there are no recesses in the back of the vert wheels for the studs to protrude into). I probably won't bother with that because I have a couple other sets of wheels I want to throw on. The vert rims are awesome though. Hard to beat for performance and bang for the buck. I'll look for close ups later.

 

In for more pics!

 

More pics as requested:

 

http://www.flickr.com/photos/ih8dsm/4502002794/

 

15x6.5 if you want to get ****




That was with Tanabe GF210's. I haven't snapped pics of the car yet dumped on coilovers. Spacers are a necessity if you want it to look good.

 

What size and brand of spacers are you running?

 

sorry, wasnt sure if it was 6.5 or not.
w/e LOL. clean cars for sure guys, but, wheels are just too small

Lloyd

 

I'm not running any spacers at all.

 

MazDan- That looks great. Definitely convinced me to run spacers on my vert.

 

Thanks. Post some pics when you do.

 

Thanks for the update MazDan, I've been wondering what spacer sizes to run.

 

Glad to help.

 

Is that your car? I've been wondering how to polish a set of vert wheels since I don't know what material they're made out of and if they have a clear coat or not.

 

http://www.autozone.com/autozone/acc...er=142419_0_0_

Some 00 steel wool and a buffer wheel.

 

Thank you sir!

 

a better option is +50mm spacers on the rear....205/50/15s

 

Unless u thinkn bougt tha infini 7 wheels they tha same look but sixteens whoo id kill for them