I made the ducts that bolt to the hubs, or are you talking about the "scoop"/shop vac hose end?

If your talking about the part that bolts to the hub. I used 16ga sheet, drilled the bolt pattern (copied from the dust shield) took a piece of 2.5 exhaust pipe and welded it up! 30 min tops!... I left these kind of flimsy... thinking that If the scoop picks up a rock through the net it would just bent the ducting out of the way and not chew the rotor up
then I used the bolts for the dust shield and attached the duct and thats it!

If you dont have access to a welder (or someone who has a welder)
Pm me and I can make you a set for $30 + shipping

OR AWR makes a set for 165.00
http://www.awrracing.com/store/produ...products_id=79

Ill get some more pics up (of the first ones I ever made btw) if your interested.

 

Ok so I found a photo of the ones I made for my car (these I made from scrap steel) anything I sell would be nicer Also I can make these any way you want.

IE
simple like shown, blows air on the outer/inside edge

- blows more at the hub and forces air out the vents

-blows air allong a channel both at the hub and the outside edge

- blows air on both the inside, outside and in through the vents to the hub

or any combanation ob blowing inside or outside you can think of...;0

 

OK Into bodywork now.... Shave the mirror openings, or use CF panel... thoughts?
Also finished ducting for the radiator.

 

 

my beater... well my good vehical.. yep..

 

Here's my Audrey 88 Gxl, Magnaflow exhaust, K&N air filter. Thats about it.

 

Went out with Ducktape the other night and played with the car a bit. Here is a video of me doing a pull from ~65MPH with Duck staying at ~65. He also wanted to get some video of the two step flame generator.Here it is.

I also managed to take a few snapshots.

 

just check my sig....it's been beat up and put back together many times.

 

T24U (left)
13angryB's (right)


Yesterday @ Bird Creek, Alaska

 

Some shots.

 

Dont have to ask me twice to post pics of my car.












Or some shots as some people call it, braless.

 

 

 

 

You didnt specify between rotary or V8 powa.

I do have a turbo vert. but no pics on my work pc

 

Almost forgot a pic of how it fits under the hood!

 

Some pics of my ride






She is still be ing worked on WOOHOOO

 

 

S5 front.. not a fake AE

 

[IMG][/IMG]

 

 

 

Tell me what you guys think



Custom made Headlights

 

 

Just a teaser of my new and favorite FC. I don't like supertrapps so I'll probably replace them with bullet mufflers and turndowns. I'll be picking the car up from Karack when he's done with the rebuild, so I'll park both my FCs somewhere and snap a few shots.

And no, I am not the giant 6'8" mexican.