fredrx7

I am swapping another motor into my 87T2 and cannot figure out where a couple things plug in. On the back of the water pump housing there is a green female plug that I have plugged in okay but just below it is another sensor that has two wires coming from it that go to a black male plug. I cant find anywhere to plug this into on the harness. Can anyone PLEASE look at theres and tell me where this plugs into? I need to know where it connects to the harness and what color the wires are on the harness side behind the clip. I have the same problem with the neutral switch coming from my tranny(5sp) I cant find anywhere tp plug this in. Can it be left unplugged? I would really really appreciate some help if anybody could tel me

Spirit-RE

iTrader: (25)

Post up a pic.

As far as I remember, the only sensors in the waterpump housing are the temp sensor for the ecu(green plug you have) and the single wire e-fan switch(not on every FC) on the thermostat housing, iirc.

Could it be an aftermarket temp sender?

fredrx7

its deffinately stock. thank you for replying. Would you be willing to look at ur's and tell me what u see?

fredrx7

also how bout the neutral switch? any chance u could look at yours and tell me? I am hoping it can just be left unplugged