RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)
-   -   My rx7 reborn thread (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/my-rx7-reborn-thread-694352/)

Sindregutt 03-07-09 06:26 PM

Im not sure but my guesses is that it turned that way because i mangange to drive 10 miles without the IC connected. That way the turbos free spooled and maybe wear the bearings? I dont know, ive never seen anything like it :P
Anyway, got the GT35R hooked up and ready to go! Probably start-ready to morrow if i can find a welder ;)

Sindregutt 03-08-09 02:39 PM

Woho! Recieved the T66 today! Fits like a glooove! Some minor mods and its ready to rumble =D
The GT35R is mounted but the T4 flange isnt good so it has to be "sanded"? down to get it perfect.. Thats about it, so next weekend is tune-in time!

Norwegian_rotary 03-08-09 03:01 PM


Originally Posted by Sindregutt (Post 9027247)
Woho! Recieved the T66 today! Fits like a glooove! Some minor mods and its ready to rumble =D
The GT35R is mounted but the T4 flange isnt good so it has to be "sanded"? down to get it perfect.. Thats about it, so next weekend is tune-in time!

You're not gonna Sand it straight are you?
Sanding = slipe med sandpapir..

Think you mean youre gonna grind it.. hehe..


Gonna be cool to se how the drifter will work with the t-66 turbo, thats the same as i'm running on my car..

Good to hear that you threw away the twins and are going for the single one on the streetcar..

Sindregutt 03-08-09 07:02 PM

yeye, didnt find the grinding word.. :P The manifold is sent to motor teknikk! Got it fixed for almost free and i have it on wdensday! i HOPE i hear both cars running next weekend!
FOund a solution for the wastegate flange as i was going through some shit/garbage in the garage.. found a cone, pipe, thing that fits perfect! Weld a few nuts on it and its ready to go! This entire "project" is all built from parts i had allready so it looks baaad! The car is gonna be flat black, gp sport, with some ugly vinyls, wastegate running out of the front fender, tinted windows, 9*18" black center wheels... Nice streetcar! I just hope the clutch wont faaail!

Sindregutt 03-11-09 02:00 PM

Waaay! No money and i had to pay 70USD to get the manifold grinded down :/ Anyway, done is done.. I also cut the 90 degree on the T66 away so its ready to be mounted in the drifter =) You guys probably seen a T66 before, but anyway ;) I like it! Its huge! I wouldnt be suprised if i went with E85!

http://i8.photobucket.com/albums/a10...g?t=1236797513

Also a pick of the streetcar enginebay.....

http://i8.photobucket.com/albums/a10...g?t=1236798004

Sindregutt 03-12-09 05:01 AM

Hurray!! more snow! We`ve 4-5ft allready!! What a winter, we usually got 1ft i march! I went to the city to get my grinded manifold, and guess what! They was`nt done with it so i aint gonna get it before tomorrow :( I got these one day license plates in the weekend so gotta have the cars going but with snowy roads i wont get the feeling of how well it runs :(
http://i8.photobucket.com/albums/a10...g?t=1236851698

Sindregutt 03-14-09 08:35 PM

Woho! The blue one is running again, now with GT35R!
The orange one needs cooling fluid, then its ready for a testdrive with T66!
Hopfully im able to test both of the cars tomorrow! THe snow has melted away on the highway =)
I`ll either cry or smile tomorrow! Figured out that the blue got really bad ign. timing so i have some work to do there aswell!

Sindregutt 03-15-09 02:48 PM

Woha! Three words... T66 is baaaad :D it works great. Just like i hoped and it was almoste plug and play. The drifter is running 1-1.3bar boost. I dont know why its jumping. I got a Tial 46mm wg with .4bar spring and a greddy profec 2 boost controler. Is it the set gain? I tried to play with it but didnt feel any different.

The blue one is still not proper timed cuz i dont know how to do it with autronic SMC.. Didnt have time to look at it today either.

Did do almost everything i planned this weekend!

Sindregutt 03-23-09 09:24 AM

Oh whell, had to modify the trigger wheel on the REW engine to get it working with the SMC like it should. Had to advance it 20degrees. Its easier to retard the timing with the autronic than advance it.. If the timing is all wrong from the beginning..
Here is what i`ve done to the drifter! Engine bay MESS!! Oil all over!!.
http://i8.photobucket.com/albums/a10...g?t=1237818196
http://i8.photobucket.com/albums/a10...g?t=1237818267

Sindregutt 04-01-09 03:42 PM

Bought a new van the other day! Need one to get all the tires and stuff back and fort to the track ;)
http://cache.finn.no/mmo/6/168/651/26_878232447.jpg
AAAND an e-brake =)
http://i8.photobucket.com/albums/a10...g?t=1238618439

Sindregutt 06-19-10 04:48 PM

So what happend to this car?

I went to the dark side!

And it feeels gooood =)

http://customshit.no/wp-content/gall...8_img_0277.jpg

A LS1 with a GT42 turbo!

How do you tune when you got a farm, a bus axle and a angle grinder?

http://www.youtube.com/watch?v=Afjw1Z-Wtts

Does it work?!

YEA, better than ever before.. Its incredible fast, the handeling is ++++ and the reliability? Well, ive used the car alot this year and i just needed a better clutch ;)

GordiniRX7 07-03-10 06:59 PM

That is bad ass. And I mean both the engine and the homemade dyno!
Any idea on the power it puts out? could you tell me the details please?

breezetime 07-03-10 08:54 PM

good I love it all now I know I have to my 90 vert 100% STOCK NOT FOR LONG THANK YOU

Sindregutt 07-15-10 03:03 PM

Here is a link to a page with some info on the build!

http://customshit.no/on-going-projects/mazda-rx-7/

http://customshit.no/wp-content/gall...sedayrx7-1.jpg

Sindregutt 07-15-10 03:09 PM

BTW its a page there with some info on the home made dyno ;)

Sindregutt 11-13-10 02:17 AM

Finally done something on the RX7. The plan for this winter is to:

* Fix clutch issues and install bullet proof bellhousing
* Moving the fuelcell under the trunk
* Making the car look good!
* Maybe going for e85 and more boost!

First off! The look.
Old look
http://customshit.no/wp-content/gall...0_img_0366.jpg

I`ve never liked the way it looked. Orange with a green viking isnt cool. Its actually not cool at all!!! Not wide.. Not low.. Not agressive..

Plan is wiiiide and low and new rims! Im going to buy 10 new 18″ wheels like you can see on the pictures below.

So, rear fenders are cut and widened in steel to reinforce the glass fiber over fenders. The front fenders will be widened in steel by the body guy.
http://customshit.no/wp-content/gall...0_img_0554.jpg

Everything will be copied so i can duplicate in glass fiber. I got molds for rear fenders, front bumper, side skirts and scoop
http://customshit.no/wp-content/gall...0_img_0472.jpg

The rears are done and it looks good! I was expecting 30mm wide fenders when i ordered them, but it isnt 30, its closer to 80mm!!
http://customshit.no/wp-content/gall...0_img_0476.jpg

Im almost finnish with the fuelcell job too
http://customshit.no/wp-content/gall...0_img_0416.jpg

Old mounting on picture above.

New “trunk” below
http://customshit.no/wp-content/gall...0_img_0463.jpg

Some more grinding and paint and its done. Fuel filler cap will be in the middle of the rear lights. (like mustangs).

Short update on what i have done to the Rx7. Im reduced at the moment so i cant work 100%. The paint guy will get the car in two weeks. So the next week i have to shine the new frontbumper, rearbumper, sideskirts, make a new hood + scoop and probably some more. Ive also ordered a pair of S5 Jdm rear lights and a set of new sideview mirrors since i smashed one this year =)

More updates soon! Stay tuned!

GordiniRX7 11-13-10 02:27 PM

Very impressive! Info on the rear overfenders? I'm looking into something widdeeee like that.

Sindregutt 11-14-10 06:00 AM

I have no ide what brand they are. Havnt found anything similar. I think i bought them from a member on this forum but he didnt know the brand either. I do have the molds for them so its possible to make a pair. Fitment is actually quite good to!

Im going to make a pair of front fenders to that will match the rears! Im making them in sheet metal but i`ll make a fiberglass mold for them to.
If you or someone else are interessted i might make a few sets and sell them.

New project!
Not rotary or rx7 related but still... ;)
http://customshit.no/wp-content/gall...3_img_0526.jpg

beefcake 11-14-10 06:42 AM

please rethink and say you are going to put a 20b in it :fingersx:
Also i sat through the whole thread today and loved it, your quite crafty at the fibreglass work, i tried to just do a simple glass layered repair on the back of my cracked bumper and two days later its still gooey :lol:

Sindregutt 11-14-10 09:30 AM

haha i have been playing with the thought of going for a 3-4 rotor but the price for a competitive 20b or 26b is to expensive versus v8s..

Fiberglass is easy to learn but it takes alot of patient to get it right. At least thats my opinion ;) I have some parts that didnt go that well!

As for composit work the entire murcielago is going to be carbon fiber and im hoping i will get enaugh honeycomb to make the front frame, floor and rear firewall

GordiniRX7 11-14-10 01:12 PM

I vote duramax...

Sindregutt 11-26-10 05:12 PM

Diesel power? :=) I like the LS V8s, reliable and cheap.

Drove the rx7 to the paint guy last weekend. someone forgot to tell me it was ice under the snow! yeay, before someone ask, yes i tried to back straight haha..
http://customshit.no/wp-content/gall...0_img_0589.jpg

NEXTIME 11-26-10 08:18 PM

SWEET!! I love the red neck dyno !

Exlex 04-22-11 04:15 PM

Sindre, any updates? I missed that you put in a LS1, if I wasn't a stupid rotarynut I would probably do the same thing, but hey, I haven't even got my car together yet so I guess it doesn't matter ;)


All times are GMT -5. The time now is 02:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands