exhaust cutout switch pictures
#1
Senior Member
Thread Starter
exhaust cutout switch pictures
hey guys, i just got an exhaust cutout from QTP and have no idea where to mount the switch.. anyone wanna post some pictures of your set up?
#2
Full Member
Join Date: Jan 2006
Location: BC, Canada
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
you could always mount it in one of the switch panels on the centre console (where the mirror controls and the foglight switch are)
most of the time there is an unused panel you can pop out, and then you just put the switch in there and then pop it back in. and that way you have a fairly clean install.. choose your switch accordingly, run wire as needed =D.
this is what i mean. in one of those 2 rectangle holes... hopefully you still have the blank panels that go in there.
most of the time there is an unused panel you can pop out, and then you just put the switch in there and then pop it back in. and that way you have a fairly clean install.. choose your switch accordingly, run wire as needed =D.
this is what i mean. in one of those 2 rectangle holes... hopefully you still have the blank panels that go in there.
#3
Senior Member
Thread Starter
wow brilliant.. didn't even think of that. anyone got a picture of how their cut out is welded onto the exhaust? i dont want to start a fire on the underbody
#4
well rested,buffet o food
Just cut a section out and tack it under the car. After everything is perfectly lined up pull the downpipe and weld it off the car (so no fire worries and cleaner welds etc), then bolt it back up.
Post open exhaust on youtube
john ny
Post open exhaust on youtube
john ny
Thread
Thread Starter
Forum
Replies
Last Post