RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)
-   -   18" GTR replica wheels, thoughts? (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/18-gtr-replica-wheels-thoughts-854342/)

RRTEC 07-30-09 06:58 AM

35mm ones will not... go withj the 24mm ones.

rotaryracer1 07-30-09 05:33 PM

what site are they at for $150 for a set?

RRTEC 07-30-09 05:44 PM

discount tire.com I posted the link,

RRTEC 07-30-09 05:46 PM


Originally Posted by rrtec (Post 9390261)

fyi- they sold out of the 24mm sets thanks to me i bet.. but you can still nab the 35mm/50mm ones and buy spacers.

RRTEC 07-31-09 02:33 PM

5 Attachment(s)
Alrighty, Mine showed up today, Discount Tire ran out of the 24mm sets I guess so they shipped me a set of 35mm instead.... They fit great in the back with NO clearance issues I can see, but up front with tires on them I am worried they may rub the front springs, I am not 100% sure but that is my best guess... I am going to get some small spacers once I get tires on them to get a better idea of how much room is needed. I am not upset, i wish they would have let me know they were going to send me these, but for $150 it could have gone much worse.

Here are a few pictures, no centercaps, dry mounted. They look rediculously huge, but I bet when the car is on the ground with some rubber they will look better, plus black centers will visually bring the size down.

Hypertek 07-31-09 02:42 PM

try putting a jackstand under the lower control arm and lowering teh jack to compress the suspension a lil?

RRTEC 07-31-09 03:33 PM

3 Attachment(s)
here is the rear jacked up until the rear wheel tucked a little.

RRTEC 07-31-09 05:30 PM

4 Attachment(s)
Ugggg.... Thinking that its going to rub up front unless I were to stretch the tire, which I dont think I am the type of person who would do that...

EvilWankel 07-31-09 06:28 PM

damn cheap price for some big wheels that are gonna look pretty damn good

RRTEC 07-31-09 09:26 PM

Thanks for the compliment. I have a feeling a few other rx7s will be popping up on here with these on them....

need RX7 07-31-09 09:32 PM

Meh, not really feeling them. A little too blocky for my tastes. Can't beat the deal though.

RRTEC 07-31-09 09:42 PM

Yeah... not my favorite style, but i am painting the centers Graphite so it should mask the bulk.. $150 shipped to my door.. cant complain too much.

EvilWankel 07-31-09 09:56 PM

I cant lie I thought about it for a few minutes heh.

bet the tires will cost 2.5x as much as the wheels

RRTEC 07-31-09 10:13 PM

Luckily I already have tires, pilot sports that came off my old cobra rims....

neofreak 07-31-09 11:25 PM

fugly!

SouthSideSlider 08-01-09 12:15 PM

a set of 5mm spacers up front would fix your rubbing issuses along with a very slight stretch

Alex Rodriguez 08-01-09 12:20 PM

they look good bro gives it a retro look, you pulled it off now cant wait to see it with tires and standing

Hypertek 08-01-09 12:54 PM

probably 225/40/18 up front, and 235 or 245 in the rear if you have room, will need fender roll of course.

MaczPayne 08-01-09 01:08 PM


Originally Posted by RRTEC (Post 9395160)
Ugggg.... Thinking that its going to rub up front unless I were to stretch the tire, which I dont think I am the type of person who would do that...

If you can get coilovers, that will solve the clearance issue, but a 5mm spacer should be enough to clear that strut. You'll have to run a narrower tire on the wheel, just a very slight stretch.

Hmm, I tempted to pick up a set for track wheels, and run 265's all around :)

hkp 08-02-09 02:35 PM

i want to see them with tires, im considering them right now. you should hurry up!

RRTEC 08-02-09 03:23 PM

i would jump soon, they have sold out of a lot of the different offsets, I will try to mount them up with tires asap.

RRTEC 08-02-09 05:17 PM

1 Attachment(s)
255/40/18... Neighbors rims... Sorry I didnt have the right lug nuts to safely put it on the ground..

https://www.rx7club.com/attachment.p...1&d=1249251363

MaczPayne 08-03-09 12:58 AM

Sucks that you couldn't get the +24 offsets. I guess the Mustang owners caught wind and snatched em up in a hurry! You could get away with a 10mm spacer since you have +35's

RRTEC 08-03-09 07:01 AM

i measured yesterday and i am goint to try a 5/16 (roughly 8mm) and see how it goes.

Spirit-RE 08-05-09 03:05 PM

More people sporting mustang wheels? I have more company now lol.


All times are GMT -5. The time now is 06:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands