Just changed my diff mount to a solid mount sounds like transmission mount
11-01-18, 12:15 PM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: May 2015
Location: florida
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Just changed my diff mount to a solid mount sounds like transmission mount
Idk new to rx7 had a bad diff mount got a solid metal one now sounds like transmission mount is bad everytime I shift I hear like a clunk from below me 1 gear runs hard anyone have any ideas
11-01-18, 08:21 PM
#2
Sucker for Punishment
That's because you have a solid mount. You are experiencing first hand what it sound like without rubber taking the blow. Now your chassis is taking the blow.
11-08-18, 03:36 PM
#3
I personally like the Mazda competition mounts. If you replace one original mount you need to replace them all from front to back with similar material or you will feel the slack of the softer / worn mounts. You may even tear the new mount from excessive movement. Although you will probably not tear the aluminum one...
Last edited by NCross; 11-08-18 at 03:38 PM.
11-09-18, 12:40 AM
#4
I personally like the Mazda competition mounts. If you replace one original mount you need to replace them all from front to back with similar material or you will feel the slack of the softer / worn mounts. You may even tear the new mount from excessive movement. Although you will probably not tear the aluminum one...
11-09-18, 12:34 PM
#5
On a side note... I made some hockey puck mounts for my S.A. over the weekend and am very pleased. Only cost $7 for hardware and two pucks. I plan on pairing them with a Mazda comp trans mount. I don't drive it much so that will be another day.
Thread
Thread Starter
Forum
Replies
Last Post
ooEfiniRx7oo
3rd Generation Specific (1993-2002)
17
08-09-04 12:12 PM
dhahlen
3rd Generation Specific (1993-2002)
11
12-18-03 07:13 PM