Hey,
Ok guys im looking at doing the 20b swap in my TII and if anyone can list everything I need to get.I use to have a web site that made motor mounts so the 20b would fit but cant find it now...

List:

20b with Tranny
Motor mounts


and I have the lt8 Microtech stand alone will that work on a 20b?

Money is not really a concern.I would like all the help I could get.
and yes I try seaching the forums.Thanks guys


kyle

 

I plan on putting my TII motor with the stand alone in a 1st gen im buying and putting the 20 in my 2nd gen..

 

dont bother getting a 20b tranny. use an s5 t2 tranny

some type of EMS
fuel system
at least a twin plate clutch
turbo setup?
as wide a tire as you can fit in the rear
the biggest radiator you can fit in the front
a good matched i/c for your turbo setup
banzai racing is one place that makes 20b mounts, check around
custom exhaust + downpipe
a good sized WG (if single turbo)
a custom exhaust manifold (if single turbo)
and at least 15G's.

this is what I came up with off the top of my head...im sure theres more.

neil

 

LOL,well I know its going to cost about 10k I have talked to some guys about it,that have done it.I may just go with a 3rd gen 13bt and do that.I heard they put out some good power and half the price?true?

Kyle
www.speedbros.com

 

I dont think a 3rd gen engine is really worth it. Theres a lot of fab involved in putting in a 3rd gen engine into a 2nd gen. All that work is better suited for a 20B.

 

oooo man now I just dont know what im doing then.everyone has a diff saying in this.

Kyle
www.speedbros.net

 

We are doing a 3rd gen engine into a second gen. Just need to do some wiring, intercooler piping, and some fuel fittings and it will be done. He is a pic...

 

sum peeps may call u a liar

https://www.rx7club.com/search.php?searchid=1197910

see above

Too bad there isnt a 20B faq or anything like that on this website yo.

 

Most of the people that have to ask about this swap arent ready to do it.

 

Well I have the funds and If my rx7 does not sell then Im doing it...Thanks for the bump..

Kyle
www.speedbros.net

 

If you need a 20B, PM me

~Ramy

 

Why are you whining about 10K for a 20B swap? That's cheap!