My 20B-ST Project
Thread Starter
Junior Member
Joined: Apr 2008
Posts: 26
Likes: 0
From: Canada
My 20B-ST Project
Here is a link to the photo gallery related to my 20B single Turbo conversion.
https://www.rx7club.com/forum/album.php?albumid=704
All comments and ideas are welcome.
Looks good...I'm partial to silver 20b FD's though. What are you doing for transmission? I'm assuming you'll be at 500whp+. Looks like you have the stock tranny installed now. Was that a single fan on your radiator? Is that enough cooling capacity?
Thread Starter
Junior Member
Joined: Apr 2008
Posts: 26
Likes: 0
From: Canada
my 20b conversion
To start i will use the stock tranny.
I shoot for 500 to 550 RWHP. (10 to 12 Psi)
I think that will be good enough for while.
I'll see but if I need I am gonna considered to go with a GURU or a Jerico one.
About the rad, it's a big 3 rows but you're right i could have to revise my set-up.
Your set up is very nice, what did you do about the sub frame .
________
Richard
My fd-20b-st
To start i will use the stock tranny.
I shoot for 500 to 550 RWHP. (10 to 12 Psi)
I think that will be good enough for while.
I'll see but if I need I am gonna considered to go with a GURU or a Jerico one.
About the rad, it's a big 3 rows but you're right i could have to revise my set-up.
Your set up is very nice, what did you do about the sub frame .
________
Richard
G/L....don't give up!!!!
Thread
Thread Starter
Forum
Replies
Last Post