converting JC Cosmo from 13b to 20B JC Cosmo
04-10-03, 03:20 PM
#1
Full Member
Thread Starter
Join Date: Mar 2002
Location: over the horizon
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
converting JC Cosmo from 13b to 20B JC Cosmo
I am looking for information about replacing the 13b engine in a JC cosmo with a 20B (engine and tranny in a front clip). Any info about possible pitfalls, what may and may not be re-used from the original setup, as well as any fabrication that may have to be done would be most appreciated.
Any pointers to wiring diagrams etc. would be helpful also.
Thanks!!
Any pointers to wiring diagrams etc. would be helpful also.
Thanks!!
04-10-03, 11:09 PM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,796
Received 2,574 Likes
on
1,830 Posts
well the goood news is that all the parts exist and its been done (mazda did it), it probably a bolt in deal too.
the bad news is that its prolly more work than just getting a 20b car in the first place
mike
the bad news is that its prolly more work than just getting a 20b car in the first place
mike
04-12-03, 12:48 PM
#4
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,796
Received 2,574 Likes
on
1,830 Posts
Re: transmission
Originally posted by psykomorf
are the transmissions the same?
are the transmissions the same?
mike
