Hey guys I havent been here in a while. I was wondering what everyone is using for their clutches. I have an OS Giken triple plate, but its killin me.
Currently the car is NA but when its turboed Im not sure what a standard puck clutch will handle. Im assuming that it is alot more streetable than the triple.
Would anyone be interested in a trade? I havent seen it since it went into the car new at the beginning of the year. I ride a gsxr now, so I havent put that many miles on the clutch. It is unspurng, with the billet clutch cover. The best you can buy for the FC. If anyone is seriously intested I will pull it out. This is my transportation when its too rainy to ride, so only if your serious.
I figured Id ask here since the 20b is the only thing that will make the power to need this kinda clutch.
Thanks
email me
slidingsky@yahoo.com

 

I'd buy it off of you or trade you for something if there is any way to use it on a FD. I know it would have to be converted to a push type to use the FC clutch, is this all? Does anyone know of a kit to do it, or could I just use a FC slave cyl with a FC's fork?

 

i reccomend ATS 3 disk carbon clutch. working perfectly!!! good for drag and for steet.
they have many options.

i used OS GIKEN before but it brakes rear end and axles at high power levels with hard shifting.

 

My 20b/FC has a Fredenza aluminum Flywheel and stage-3 clutch.

I have an extra set; unopened; new in box; if someone needs one.

 

I run the OS tripple plate as well. My roomate uses the ATS carbon carbon tripple plate on his 20b. OS giken sells the "changing parts" adaptor for converting the FD stock system to push. It runs about 300 american or so.

neil

 

Exedy twin plate sprung or carbon clutch.

 

I've got an ACT Extreme with 6 puck and it works very well right now but I'm under break in on the motor so who knows after it's tuned...