20B workshop manual anyone? fuel question
#1
Senior Member
Thread Starter
20B workshop manual anyone? fuel question
Would be great to have a workshop manual for the 20b engine, where i can see how they have the stock setup for fuel etc..
The reason i need this is beacaus I'm going to use my stock injectors in the beguinning just to see how everything works on the car before i start tune it.
The thing is that on the stock fuel rails, there are som "valves" at the end of both of them, just wanna know what fucntion those has, and if it is something that i need to use or just to remove them..
Would be realy great if I could get a answer on this question.
Regards
Norwegian_rotary
The reason i need this is beacaus I'm going to use my stock injectors in the beguinning just to see how everything works on the car before i start tune it.
The thing is that on the stock fuel rails, there are som "valves" at the end of both of them, just wanna know what fucntion those has, and if it is something that i need to use or just to remove them..
Would be realy great if I could get a answer on this question.
Regards
Norwegian_rotary
#2
Hi.
Everything was uploaded recently...
https://www.rx7club.com/20b-forum-95/need-wiring-diagram-743665/
Harry
Everything was uploaded recently...
https://www.rx7club.com/20b-forum-95/need-wiring-diagram-743665/
Harry
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,840
Received 2,604 Likes
on
1,847 Posts
primary rail has a pulsation damper, secondary rail has a fuel pressure regulator.
the damper is passive, its not hooked up to anything
regulator is hooked to vacuum/boost just put the vacuum line back
the damper is passive, its not hooked up to anything
regulator is hooked to vacuum/boost just put the vacuum line back
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM