The 20b project plan.
get the motor to run on the shop floor with the
stock computer, trani, turbos.
First step since I got the front clip was to
remove everything from the clip.
Now I need to figure out what all the wiring is
so i can eliminate the wires that were cut off
when the clip was cut, some real fun!
So I have started to reduce the wiring that's
not directly related to running the motor and
trani, what at first i thought would be an easy
thing, is turning out to be a little harder to do
It just seems, what you would think to be
nonessential, like the power window wiring,
seems to be integrated in with essential wiring.
To top it all off, its not helping that i cant read
Japanese!!!
I am off to find a translator to help me.
more as the project progresses
matt

 

ouch, I would hate to even see a half cut cosmo harness. Very painful to tackle that job.

 

if it helps the stock wiring will fit and fc chassis. if you get the diagrams from and fd you can match things up, they bith have the same parts its just they are in different spots.

mike

 

You're asking for information that I would normally charge several hundred dollars in labor to do?



-Ted

 

its not the parts that are the problem its all the
extra wiring for all the neat stuff that was in
the cosmo. the more i learn was in the comso as
standard options the more i wish i could have a
complete car to drive!
matt

 

woops the above was supposed to quote j9fd3s 's
post
"if it helps the stock wiring will fit and fc chassis. if you
get the diagrams from and fd you can match things up,
they bith have the same parts
its just they are in different spots. "

also for got to say " thanks for the bit about
the stock wiring will fit in the fc great help!
matt