well, took me a long time, but i finally found a engine to swap into the car (also a suspension to go with!)

also got the wiring harness, tranny, and a cone filter, just need to get a 13b fuel pump or a upgrade and a double check on everything to make sure it work and hopefully it will soon be running again,

thought i would share cause im actually had something good happen for this car for the first time in a long time, now if it would only cool down here in tx....

<l><l>

 

pics:

 

get a s4 of s5 intake, it's a good HP gain for a gsl-se engine.

 

Nice! Gotta love the good ol' square dynamic chamber on the SE 13B

 

is it a direct bolt on or does it need any modifications? im trying to get this as "bolt-on" as possible

and thanks

<l><l>

 

It's fairly bolt on, you'll have to use your gsl-se intake gasket for a porting template for the s4-s5 intake. It just takes some work with power grinder.

 

Bolt on Yes, but you can't use the additional injectors
or the Mass Airflow sensor.

In other words - keep the SE one.