will this work?
02-12-07, 09:34 PM
#1
Full Member
Thread Starter
Join Date: Jan 2007
Location: georgia
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
will this work?
will the spark plug wires from an fc work with the wires from my 84 gsl-se? like length wise cause i can only find 10.3mm wires for the fc models and i want to use this gauge of wire for my fb. also im planning on doing the DLIDFIS settup and waz wondering if the wires from an fc would work. cuz the thicker gauge means less resistance so more power.
Thanks
Thanks
02-13-07, 02:25 AM
#2
FB+FC=F-ME
They will work,but youll have to secure the extra wiring somehow.Shorter wires make for less resistance,but if its 5-6 inches longer than it needs to be,itll still work.Larger OD doenst mean they have less resistance,it could just mean the silicone insulation is thicker.Core composition and length determine resistance.
Here a link to 10MM wires for a 1st gen.Ive run the same set of wires for about 8 years, on all my engines right up to my current TII setup....still no problems.
http://www.mazdatrix.com/ign-3.htm
Here a link to 10MM wires for a 1st gen.Ive run the same set of wires for about 8 years, on all my engines right up to my current TII setup....still no problems.
http://www.mazdatrix.com/ign-3.htm
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM