since rotorhead.ca is temporarily not accepting orders, where would i find me a good price on a dual-belt pulley for the alternator?

tia

-brad

 

rx7.com

 

yeesh. $50... i don't exactly need a nice black finish on it. just a stock looking unit would suffice.

 

ebay

 

is the SE alternator compatible with a FC pulley? i'm looking at the dual-belt pulley over at nopistons.com for the FC, and i was thinking it might work on my alt pulley...

tia.

 

http://www.mazdatrix.com/b9.htm

i got mine from them its still around $50 shiped but its nice.

 

just use a yoohoo belt
jeff where are you with the napa belt #?

 

I'm going to work on a way to pre-stretch the napa belt. I've found that it's a little tight when new. It's still the closest real automotive V belt I've ever found. Just a little thicker than 3/8".

I installed a used one on the 13B in my MG and it went on very nicely and is the perfect tension. I need to find a way to mimick running it for several hours.

I think two pullies with a tension adjustment and a motor to drive them would be perfect. I'll increase the tension at regular intervals untill it's fulley broken-in. Then it should go on as nicely as the used one did.

Wasn't the number 2175? maybe with a 25 at the begining? I'll look it up tomorrow.

 

Higgi might have some of the rotor shaped one's left.
Do a search for his user name and then click on his www

 

http://rx7cz.net/shop/

 

Napa 25 7215