1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

What's wrong with my 13b engine?

Thread Tools
 
Search this Thread
 
Old 10-15-07, 08:07 PM
  #1  
Newbie
Thread Starter
 
Spencer's 84's Avatar
 
Join Date: Apr 2007
Location: Newton, Kansas
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
What's wrong with my 13b engine?

I have an '84 gsl-se w/ 96k miles. Last weekend it started smoking and burning oil like crazy. It burnt through about 4 quarts of oil in 30 miles (I wouldn't have driven that far, but I had to get back to my house). I had to pull off the highway and add oil half way. I'm not sure what's exactly wrong with the engine. Could it be an engine gasket that's gone bad?

Thanks,
Spencer
Old 10-15-07, 08:15 PM
  #2  
Senior Member

iTrader: (1)
 
borinquen7's Avatar
 
Join Date: Apr 2005
Location: Marlborough,Ma
Posts: 266
Likes: 0
Received 0 Likes on 0 Posts
Man thats alot of oil, sounds more like a leak somewhere have you checked for leaks or is the engine actually eating it. Check you FMOC lines for leaks,, Just my 2 cents. I also have an se and I am looosing oil but it's due to a crack in my oil cooler...
Old 10-15-07, 08:44 PM
  #3  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,834
Received 307 Likes on 268 Posts
4 quarts in 30 miles???

wow. yeah, that sounds like a leak to me. check the underside of the car. no matter what, i wouldn't advise driving it until you repair the problem. let us know what you find.
Old 10-15-07, 09:37 PM
  #4  
Lives on the Forum

iTrader: (13)
 
Rx-7Doctor's Avatar
 
Join Date: Jul 2004
Location: Oregon
Posts: 10,584
Likes: 0
Received 11 Likes on 10 Posts
More than likely you lost an oil cooler hose. The smoke you are seeing is probably from burning on the exhaust.
Old 10-15-07, 10:18 PM
  #5  
i play with my wankel

 
rolfs_7's Avatar
 
Join Date: Jul 2005
Location: North Manchester, Indiana
Posts: 1,630
Likes: 0
Received 0 Likes on 0 Posts
check ur oil pressure??
Old 10-15-07, 10:27 PM
  #6  
Wrkn Toyota, Rootn Wankel

 
BlackWorksInc's Avatar
 
Join Date: Sep 2007
Location: "Haystack" Hayward, CA
Posts: 1,642
Likes: 0
Received 1 Like on 1 Post
Check your FMOC, mine had a hairline crack on the outside of the actual connector where the thread was. I did an oil change and found it bled about one or two pints just running it for a minute. Luckily my Welding instructor was nice enough to do an emergency TIG repair and now I will never worry about replacing my FMOC, at least for now...

But yeah, sounds like either a hairline crack got way bigger or you lost a hose. if it was your engine, I doubt that it would run enough to take it on a highway if its consuming that much oil. The sludge would bog it down faster than you can say Zoom-Zoom.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wallyrx7
Rotary Car Performance
2
08-20-15 05:55 PM
cdn
2nd Generation Non-Technical and pictures
0
08-11-15 08:59 PM



Quick Reply: What's wrong with my 13b engine?



All times are GMT -5. The time now is 03:22 AM.