1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

What other factory wheels bolt up to a first gen?

Thread Tools
 
Search this Thread
 
Old Oct 29, 2011 | 04:33 PM
  #1  
therx7guy666's Avatar
Thread Starter
Rotary till i die!
Tenured Member 05 Years
 
Joined: Feb 2006
Posts: 150
Likes: 0
From: north carolina
Question What other factory wheels bolt up to a first gen?

I found a gsl-se in a junk yard for $400. It just needs a set of wheels. I was thinking about just grabbing a set off of a car in the yard just so i can roll it home. What other cars have the same bolt pattern as the GSL-SE?

Thx for your help. (And yes i tried searching)
Reply
Old Oct 29, 2011 | 04:45 PM
  #2  
-Gamah's Avatar
Oil Leak
iTrader: (1)
 
Joined: Mar 2011
Posts: 314
Likes: 0
From: Minnesota
4x110 are pretty rare, but search harder:

https://www.rx7club.com/1st-generation-specific-1979-1985-18/4x110-wheel-list-544069/
Reply
Old Oct 29, 2011 | 05:43 PM
  #3  
DarrenTRS's Avatar
Jolly Green Giant
Tenured Member 10 Years
iTrader: (1)
 
Joined: Feb 2008
Posts: 509
Likes: 0
From: San Antonio, TX
Originally Posted by -Gamah
4x110 are pretty rare, but search harder:

https://www.rx7club.com/showthread.php?t=544069
Perhaps you should as well, GSL-SE's are 4x114.3.

Off the top of my head:
FC
240SX
Z31 300ZX

Edit: here's a list of cars with stock bolt patterns, 4x114.3 = 4x4.5 should help expand the possibilities a little.
http://www.teufert.net/wheels/bolt-pat.htm
Reply
Old Oct 29, 2011 | 06:02 PM
  #4  
Sgt.Stinkfist's Avatar
premix, for f's sake
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Jun 2004
Posts: 1,438
Likes: 5
From: madison, WI
AE86's, mkII supra, honda accords.... Lots of 4 bolt toyotas
Reply
Old Oct 29, 2011 | 11:36 PM
  #5  
-Gamah's Avatar
Oil Leak
iTrader: (1)
 
Joined: Mar 2011
Posts: 314
Likes: 0
From: Minnesota
Originally Posted by DarrenTRS
Perhaps you should as well, GSL-SE's are 4x114.3.

Off the top of my head:
FC
240SX
Z31 300ZX

Edit: here's a list of cars with stock bolt patterns, 4x114.3 = 4x4.5 should help expand the possibilities a little.
http://www.teufert.net/wheels/bolt-pat.htm
aha, my bad, i should read better
Reply
Old Oct 29, 2011 | 11:53 PM
  #6  
DarkDrakeX's Avatar
RX-7 NUT
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 444
Likes: 1
From: California
Originally Posted by DarrenTRS
Perhaps you should as well, GSL-SE's are 4x114.3.

Off the top of my head:
FC
240SX
Z31 300ZX

Edit: here's a list of cars with stock bolt patterns, 4x114.3 = 4x4.5 should help expand the possibilities a little.
http://www.teufert.net/wheels/bolt-pat.htm

Depends on the FC alot of FC's have 5 bolts =P u need to search harder as well =P
Reply
Old Oct 30, 2011 | 11:15 AM
  #7  
DarrenTRS's Avatar
Jolly Green Giant
Tenured Member 10 Years
iTrader: (1)
 
Joined: Feb 2008
Posts: 509
Likes: 0
From: San Antonio, TX
Originally Posted by DarkDrakeX
Depends on the FC alot of FC's have 5 bolts =P u need to search harder as well =P
Touche
Though I would expect one could distinguish between counting to 4 and counting to 5 and realizing there is a difference :P Same goes for the 240SX but alas you have a point.
Reply
Old Oct 30, 2011 | 07:56 PM
  #8  
DarkDrakeX's Avatar
RX-7 NUT
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 444
Likes: 1
From: California
If there ordering them online and dont realise it its very possible to get the wrong one. 4x114.3 is the bolt pattern so as long as you have that they will at least bolt on. Idk the gsl-se offset TBH
Reply
Old Nov 2, 2011 | 08:38 PM
  #9  
roondawg's Avatar
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2004
Posts: 224
Likes: 2
From: Georgia
I've got stock SE wheels for $100, hit me up I'm in VA.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 12:41 AM.