1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

what/how to remove airpump GSL-SE

Thread Tools
 
Search this Thread
 
Old Nov 25, 2003 | 10:11 PM
  #1  
spoolin's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Aug 2001
Posts: 1,024
Likes: 1
From: Memphis, TN - wishin' i was back in Ft Worth
what/how to remove airpump GSL-SE

i searched on how to remove the air pump and all associated things on my GSL-SE and only came up with vague responses like remove airpump.

no kidding?

what i would like to know is if anyone has removed it and the egr thing or what ever it is that the hose connects to on the LIM. what else will i have to do to take it off and block up the side of the LIM. will i have to do anything with the rats nest?

i don't have to worry about emissions and the car came with a RB cat replacement pipe on it.

thanks in advance
Reply
Old Nov 25, 2003 | 10:35 PM
  #2  
JIMMY54's Avatar
GSL-SE PRO
Tenured Member 20 Years
iTrader: (2)
 
Joined: Aug 2001
Posts: 2,515
Likes: 1
From: MISSISSAUGA, ONT. CAN
if I remember correctly, remove the egr/acv and block it off, then you'll just have a plug which gets taped away. The acv has a silencer and some plastic tubes which you can also chuck. The airpump I kept on to operate the 6 ports but you can remove it and tie the 6-ports always open. The airpump has 2 bolts to undo and a belt. But it's wise to run a dual alternator pully or you'll have the belt slipping at high rpm's because of the missing airpump.

The rats nest has a proper proceedure, hopefully someone else can help you with that.

The airpump gets it's air from the airbox so you'll have to seal the box aswell.
Reply




All times are GMT -5. The time now is 05:15 AM.