Weber Questions?
Thread Starter
Full Member
Joined: Jan 2004
Posts: 129
Likes: 0
From: north carolina
Weber Questions?
I Just Trashed All My Fi Stuff From My Se. I Have A Street Ported
13b From A 87gxl. I Am Going To Put A 45mmweber Side Draft On It And Am Wondering If There Are Any Tips I Need To Know. The Feul Pump Problem Is Solved But Anything Else Will Help Me. Also What Kind Of Hp Can I Expect?
13b From A 87gxl. I Am Going To Put A 45mmweber Side Draft On It And Am Wondering If There Are Any Tips I Need To Know. The Feul Pump Problem Is Solved But Anything Else Will Help Me. Also What Kind Of Hp Can I Expect?
This thread has some useful links. https://www.rx7club.com/1st-generation-specific-1979-1985-18/weber-48-dcoe-jet-sizing-help-362439/
Do some searches, this has been discussed many times, although we need a Weber thread sticky and build a knowledge base of jetting info.
Also search in the race section. Good luck.
Do some searches, this has been discussed many times, although we need a Weber thread sticky and build a knowledge base of jetting info.
Also search in the race section. Good luck.
Full Member
Joined: Apr 2005
Posts: 113
Likes: 0
From: Milwaukee, WI
45 Weber DCOE
The weber 45 without some modification's isn't going to be enough gas for the SP engine you have. I had a 45 DCOE on a stock 90 engine and it ran good under 7000 rpm's. I'm sure there are some other running 45DCOE out there but i'd do like the other post stated check out some of the racing section's. I noticed in austrailia those guys love weber's and there using them on EP,MP, BP. So, i'm sure it can be done ! Good luck !!
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM