Weber Leak
#1
Senior Member
Thread Starter
Weber Leak
Before I, or I have someone else, tear into this - any idea what the leak on the right might be caused by? The gaskets have always wicked gas since I installed the carb, but this seems a larger issue. I've read various things that say gaskets can be damp, some say they shouldn't be at all. Any insights would be appreciated!
Last edited by RXTbone; 07-12-18 at 08:31 AM.
#2
Have RX-7, will restore
iTrader: (91)
Is the mating surface clean and knick free under both gaskets? I would suspect either a warped flange, or a faulty sealing surface on the intake manifold or carb. I wouldn't be comfortable with gas seeping out. I would clean the gas off of the carb, check the flanges and make sure they're true, clean, and free of any markings, and install new gaskets and see what happens.
#4
Senior Member
Thread Starter