WEBER IDA --help--
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: USA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
WEBER IDA --help--
I have a 12A MFR PP, with a 48ida
Having issues when raising the fuel pressure above 3psi it starts to drip, Ive tried multiple float adjustments ect.
3.3 GB needle and seat, removed screen and machined the extra pump passage, the usual mods.
Looking for any insight or help thanks in advance..
Having issues when raising the fuel pressure above 3psi it starts to drip, Ive tried multiple float adjustments ect.
3.3 GB needle and seat, removed screen and machined the extra pump passage, the usual mods.
Looking for any insight or help thanks in advance..
#2
The Shadetree Project
iTrader: (40)
either your needle is bad, your float is set worng, or you're fuel pressure gauge is worng and it's getting more pressure than it says. There can be no other cuases... I've heard of teh glass ball inlets not sealing well, and that they're best suited for race, abd not street. try and find a 3.0 needle.
Thread
Thread Starter
Forum
Replies
Last Post