1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Vibration

Thread Tools
 
Search this Thread
 
Old Nov 15, 2004 | 04:27 PM
  #1  
Sweet Long 7's Avatar
Thread Starter
Newbie
 
Joined: Aug 2004
Posts: 3
Likes: 0
From: CALIFORNIA
Vibration

1982 GSL - 5sp. Vibration at varioius speeds, I had u-joints replaced. Still has vibration. Any suggestions?
Reply
Old Nov 15, 2004 | 04:50 PM
  #2  
Rotarx7's Avatar
hoycee$$$$$
Tenured Member 15 Years
iTrader: (3)
 
Joined: Jun 2004
Posts: 932
Likes: 1
From: pasadena
how are your tires and your motor mounts? have you checked those yet? have you ever used FIX A FLAT? cuz one time i used that cuz i really really had to. it work good for awhile but then afterwards it just turns into a nasty liquid that just floats around inside your tire and causes your balancing to go off.
Reply
Old Nov 15, 2004 | 04:56 PM
  #3  
d0 Luck's Avatar
raysspl.com
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 3,508
Likes: 0
From: L.A.
yep. could also be that your wheels need balancing. my buddy's 240sx was ridiculously vibrating on the steering wheel and the problem was solved when he got his rims balanced. not that expensive to balance either.. professional local wheel shop wll do
Reply
Old Nov 16, 2004 | 09:59 AM
  #4  
Sweet Long 7's Avatar
Thread Starter
Newbie
 
Joined: Aug 2004
Posts: 3
Likes: 0
From: CALIFORNIA
Had slight vibration, purchased new tires. Had the balancing rechecked. (Maybe one of the new tires are bad?) Had the u-joints replaced. Vibration got worse. Vibrations is worse at higher RMP's. 3rd & 5th gear "appear" to be worse. I was leaning toward the transmission, but my husband rotated the drive line 180 degrees. No change. I will check the mounting brackets.
Reply
Old Nov 16, 2004 | 10:14 AM
  #5  
RotorMotorDriver's Avatar
Seven Is Coming
Tenured Member 20 Years
iTrader: (1)
 
Joined: Dec 2001
Posts: 6,503
Likes: 4
From: Washington
I know you say you had the U-Joints replaced, but is the driveshaft balanced? You said it got worse after they did it, maybe the balance weights are falling off and when they did the work they knocked more of them off? I would check that.

In my experiance its usually a tire low, wheel/tire out of balance, or a driveshaft imbalance. It could possibly be bad mounts too, the tranny mount on one of my cars was completely toasted, so thats possible too, however I usually see it being one of the first few things I listed before that. Good luck!

~T.J.
Reply
Old Nov 19, 2004 | 06:53 PM
  #6  
rawdog905's Avatar
Newbie
 
Joined: Nov 2004
Posts: 3
Likes: 0
From: Meridian, MS
check your water pump, my whole car had bad vib's
Reply
Old Nov 19, 2004 | 11:31 PM
  #7  
Kentetsu's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Jun 2004
Posts: 11,359
Likes: 14
From: Grand Rapids Michigan
Have you had the alignment checked?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DaleJK
New Member RX-7 Technical
1
Aug 31, 2015 10:19 AM
MasteRX
2nd Generation Specific (1986-1992)
11
Dec 3, 2001 01:43 AM




All times are GMT -5. The time now is 01:36 PM.