UNSAID Rx7 from Australia
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 25
Likes: 0
From: Sunshine Coast QLD
UNSAID Rx7 from Australia
G'day all...
Just thought i would share the pics and details of my custom 1985 S3 RX7.
13BT motor New housings, extend port, dowelled, comp gears, RX8 2pc seals bu RX Engineering
EFI hardware 50mm throttle bodies custom hat for intercooler piping
Microtech LTX8 with bosch coils
PWR custom oil and intercooler recored radiator for now
S5 high flow turbo (TO4 front end) by GCG Turbochargers
Custom mix of Cobalt Blue paint with Holden Barina purple base coat by Road Rage Paintworks
Simmons OM wheels 17x7 and 17x8, Falken205/45/17 and Falken 235/40/17 respectively
9'' diff with 4.3 LSD billet everything from JP Fabrication
Custom interior all in vinyl due to i hate maintaining leather
Pics below let me know what you think.. I will post some more when i work out how.
Trent
Just thought i would share the pics and details of my custom 1985 S3 RX7.
13BT motor New housings, extend port, dowelled, comp gears, RX8 2pc seals bu RX Engineering
EFI hardware 50mm throttle bodies custom hat for intercooler piping
Microtech LTX8 with bosch coils
PWR custom oil and intercooler recored radiator for now
S5 high flow turbo (TO4 front end) by GCG Turbochargers
Custom mix of Cobalt Blue paint with Holden Barina purple base coat by Road Rage Paintworks
Simmons OM wheels 17x7 and 17x8, Falken205/45/17 and Falken 235/40/17 respectively
9'' diff with 4.3 LSD billet everything from JP Fabrication
Custom interior all in vinyl due to i hate maintaining leather
Pics below let me know what you think.. I will post some more when i work out how.
Trent
Last edited by rotor4me; Jul 1, 2005 at 12:58 AM.
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 25
Likes: 0
From: Sunshine Coast QLD
Trending Topics
Aussie Rx7 Freak
Joined: Nov 2002
Posts: 412
Likes: 0
From: Adelaide, Australia
Oh, yes I did and I updated thread accordingly.
I also have pics of the damage they did so I will post tomororw. Still waiting for settlement of claim, but the car is a write off.
Read thread here:
https://www.rx7club.com/showthread.p...ght=stolen+rx7
I also have pics of the damage they did so I will post tomororw. Still waiting for settlement of claim, but the car is a write off.
Read thread here:
https://www.rx7club.com/showthread.p...ght=stolen+rx7
Junior Member
Joined: Jul 2005
Posts: 32
Likes: 1
From: Orlando FL
Simmons OM wheels 17x7 and 17x8, Falken205/45/17 and Falken 235/40/17 respectively
So what offset are you using for the 8 inch wheel in the rear. And is your rear end the same width of the factory GSL-SE rear end?
So what offset are you using for the 8 inch wheel in the rear. And is your rear end the same width of the factory GSL-SE rear end?
Joined: Jul 2002
Posts: 7,301
Likes: 3
From: District of Columbia
I have always admired the care and passion that Auzzies put into their FB's. It just seems like you see a lot more "show quality" FB's comming out of AZ then the states.
Thread
Thread Starter
Forum
Replies
Last Post
