Ugly SE got painted
06-19-06, 11:29 AM
#26
Anytime baby!
You should powdercoat the windshield trim pieces and drip rails. If you paint them they will fade again. I had all my stuff powdercoated for only $75.
Right on.
Right on.
06-19-06, 10:13 PM
#27
Rotary Freak
Thread Starter
Join Date: Sep 2002
Location: SF BayArea
Posts: 2,815
Likes: 0
Received 0 Likes
on
0 Posts
I noticed that Harbor Freight has a powdercoating kit - wonder if it's any good.
I hate to pry off those bits and pieces around the glass - I'm afraid of wrinkling something. I was just going to mask and shoot with a black semigloss from Home Depot. The rubbery sidepieces are OK, no refinish required. Some of the interior burgundy plastic pieces are faded and foggy, but Victoria British has a spray they brag is good.
I hate to pry off those bits and pieces around the glass - I'm afraid of wrinkling something. I was just going to mask and shoot with a black semigloss from Home Depot. The rubbery sidepieces are OK, no refinish required. Some of the interior burgundy plastic pieces are faded and foggy, but Victoria British has a spray they brag is good.
06-20-06, 10:14 AM
#28
wheres the water goin?
iTrader: (9)
Join Date: May 2005
Location: Nor Cal
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
She loooks really good where did go to get it all done
a bit off topic but where was the yard that you saved it from was it the one in Sac. bc i cant really find any around here in the Vallejo, Bay Area and im going to try and do the same maybe!
a bit off topic but where was the yard that you saved it from was it the one in Sac. bc i cant really find any around here in the Vallejo, Bay Area and im going to try and do the same maybe!
Last edited by 3rd and final 7; 06-20-06 at 10:16 AM.
07-03-06, 07:47 AM
#29
Rotary Freak
Thread Starter
Join Date: Sep 2002
Location: SF BayArea
Posts: 2,815
Likes: 0
Received 0 Likes
on
0 Posts
I got it from a private owner who was going to junk it, not a yard. Same as the 91 Alfa 164L I picked up. I don't recommend this as a good $$$ deal, incidentally, but I can't stand to see a decent car disappear into crusher when so little is required to keep it on the road. It costs more to fixup a car than to buy a good one.
The door-wreckers are at work already. My sightlines were damn clean a month ago, but already some dunce managed to follow me out to the remote reaches of the parking lot and bump the drivers-side door. %#%^$&^^. But it's just a shallow oilcan dent so I can probably work it out with a suction cup or careful pressing with the inside panel off (which I'll be doing when I install doorlock solenoids to compensate for the key mismatches).
One time I drove out to the end of a parking lot and a guy followed me there just so he could park right next to me, so I drove away to another remote place. Most people are like sheep: follow somebody, anybody, else.
The door-wreckers are at work already. My sightlines were damn clean a month ago, but already some dunce managed to follow me out to the remote reaches of the parking lot and bump the drivers-side door. %#%^$&^^. But it's just a shallow oilcan dent so I can probably work it out with a suction cup or careful pressing with the inside panel off (which I'll be doing when I install doorlock solenoids to compensate for the key mismatches).
One time I drove out to the end of a parking lot and a guy followed me there just so he could park right next to me, so I drove away to another remote place. Most people are like sheep: follow somebody, anybody, else.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM