Twin Turbo 12A (pics)
#2
Admitted Sevenaholic
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
#3
Uchinanchu
Join Date: Sep 2002
Location: Orlando, FL
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
HKS twin turbo for the 12A used in a SA22C RX-7.
The kit was installed around 1986 and has about 3000km on it.
The motor has been sideported a bit(street ported for those in the states).
The turbos are TD05-10B times 2
Comes with intercooler, sidedraft weber 50pi(50mm)
2 additional injectors, AIC(additional injector controller), 75pi(75mm)aluminized muffler
It is recorded that the car dyno'd at around 280ps back in the day
Pretty sure with some tuning it will push over 300
the engine turns with ease, and the turbos do not have bad wear
attn: theres no wastegate, missing the holder for the idle jet, no water pump, and other little parts on the engine may be worn out. since it is an old engine expect to overhaul everything before use.
no flywheel
The kit was installed around 1986 and has about 3000km on it.
The motor has been sideported a bit(street ported for those in the states).
The turbos are TD05-10B times 2
Comes with intercooler, sidedraft weber 50pi(50mm)
2 additional injectors, AIC(additional injector controller), 75pi(75mm)aluminized muffler
It is recorded that the car dyno'd at around 280ps back in the day
Pretty sure with some tuning it will push over 300
the engine turns with ease, and the turbos do not have bad wear
attn: theres no wastegate, missing the holder for the idle jet, no water pump, and other little parts on the engine may be worn out. since it is an old engine expect to overhaul everything before use.
no flywheel
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM