Turn Signal problems
#1
GOT WANKEL?
Thread Starter
Turn Signal problems
So here's the story, When i got the car they would work weird- blink blink blink blink solid. A little bit later, the problem dissappeared, but now it's back.
So far I've:
-checked fuses
-checked connections to tail lights
-checked fusible links
It will blink fine then stop and stay constant, and then every other time you turn on the signals, solid.
Any ideas?
I searched, but didnt find what i was looking for.
Thanks.
So far I've:
-checked fuses
-checked connections to tail lights
-checked fusible links
It will blink fine then stop and stay constant, and then every other time you turn on the signals, solid.
Any ideas?
I searched, but didnt find what i was looking for.
Thanks.
#4
callin' tokyo
Join Date: Dec 2002
Location: Windsor, Ontario
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Looking at the FSM it looks as if you have the same system as the 84/85 where the system uses the same flasher unit to drive both the turn signal and hazzard lights.
So what you do when the signals act up is to turn on the hazzards.
- If it starts flashing then the flashing unit is good.
- Walk around the car and see which bulb is dead.
So what you do when the signals act up is to turn on the hazzards.
- If it starts flashing then the flashing unit is good.
- Walk around the car and see which bulb is dead.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM