What would be the cheapest way to get a manifold to fit my 12A? I have searched this and all that come up is swaps. I want to boost my stock 12a, small boost nothing big. I have seen some people say a 13b moded will work but I cant get my hand on one here. I dont wanna go with RB and pay 250+ for something I have to hack up and mod to work. Is there any place I can get the flange thing that bolts to the motor? Im not looking to run over 8psi (if that) till I rebuild and port. I have also posted in single turbo fourm and didnt get the info i needed.

 

Racing Beat sells their flanges individually. Go to that link and then to the "exhaust flanges" section. You'll find it there.

 

im kind of in the same boat as you.

im going to try to produce my own and see how she works. i've noticed there's no one out there who does this, i might sell some here

 

there is a dude that sells them http://www.rx3mist.com/service.htm im not sure if this was the one

there defintly is a market

 

i know where you can get 1 cheep ...... you can buy mine woot manifold,waste gate,bov,side draft manifold, all you need to get is carb turbo piping and a intercooler if you want 1