TURBO-fb- meal<>Deal
01-27-04, 02:18 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Mosport Raceway,Bowmanville,Ont.
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
TURBO-fb- meal<>Deal
1984 GSL SE- Silver with maroon int.
16 Inch ROH rims in new condition with brand new
225 40 16 Yokohama A520's REAR and 215 40 16 FRT.
Coil over frt suspension with camber plates. Tokico Illumina in front and Tokico blues in rear with Ground Control lowering springs.
J.O Rack and Pinion kit.
Huge front mount intercooler which is bar and plate in design and is an insane 4.5 inches thick. It has all 3 inch stainless intercoolier pipes.
The engine is a 13BRE Cosmo with a TurboII trans with never used ceramic disc. Full 3 inch stainless exhaust front to back including down pipe and one off stainless muffler. Car has a five hundred dollar NOS Fuel Pump.
The car is set up using a factory TurboII radiator.
The car has a TII wiring harness already modified to work with the SE.
The engine has to be set in the car, I have been unable to do so due to a severe back injury. Since I have to have back surgury and need to heal it, will be a long while before I get to it soooo I thought I would offer it 4sale. I think its a give away at $6000 CAN.
I hate to sell it but were going to need $$$$ more than a pain inducing turbo fb.
16 Inch ROH rims in new condition with brand new
225 40 16 Yokohama A520's REAR and 215 40 16 FRT.
Coil over frt suspension with camber plates. Tokico Illumina in front and Tokico blues in rear with Ground Control lowering springs.
J.O Rack and Pinion kit.
Huge front mount intercooler which is bar and plate in design and is an insane 4.5 inches thick. It has all 3 inch stainless intercoolier pipes.
The engine is a 13BRE Cosmo with a TurboII trans with never used ceramic disc. Full 3 inch stainless exhaust front to back including down pipe and one off stainless muffler. Car has a five hundred dollar NOS Fuel Pump.
The car is set up using a factory TurboII radiator.
The car has a TII wiring harness already modified to work with the SE.
The engine has to be set in the car, I have been unable to do so due to a severe back injury. Since I have to have back surgury and need to heal it, will be a long while before I get to it soooo I thought I would offer it 4sale. I think its a give away at $6000 CAN.
I hate to sell it but were going to need $$$$ more than a pain inducing turbo fb.
01-27-04, 02:38 PM
#3
JO, sorry to hear about the back problems, but at least we're in Canada! You don't have to sell the car to PAY for the surgery up here! Is CP still doing the R&P kits while you're in the hospital?
It's an awesome car, and if I had the moulah I'd probably ****** it, since I'm only 5 hrs away in Ottawa. But alas, my project car calls to me and the only money I have is going towards putting her on the road this May. Good luck selling her.
Jon
edit: Whether or not it belongs in the classifieds, most people don't look in the classifieds anyway! And besides, it's an *awesome* 1st gen - so it's in the 1st gen section!
Though I suggest posting it in the classifieds and putting a link to it in the Canadian Forum.
It's an awesome car, and if I had the moulah I'd probably ****** it, since I'm only 5 hrs away in Ottawa. But alas, my project car calls to me and the only money I have is going towards putting her on the road this May. Good luck selling her.
Jon
edit: Whether or not it belongs in the classifieds, most people don't look in the classifieds anyway! And besides, it's an *awesome* 1st gen - so it's in the 1st gen section!
Though I suggest posting it in the classifieds and putting a link to it in the Canadian Forum.
Last edited by vipernicus42; 01-27-04 at 02:41 PM.
