trying to help
Thread Starter
Full Member
Joined: Sep 2005
Posts: 108
Likes: 0
From: Yokosuka Japan
trying to help
good day, i have a friend who is putting a 13b from an FC into a 82 first gen 7. does anyone have a wireing diagram for the original 12a engine well for the whole car would be great i have searched all over i found a bunch of links with people telling others to buy one but even mazda trix doesnt have one for the 82 please guys help us out
These guys had all the manuals, but I just tried the site and got a forbidden error. http://www.rotaryrefs.net/
callin' tokyo
Joined: Dec 2002
Posts: 1,353
Likes: 0
From: Windsor, Ontario
FB+FC=F-ME
Joined: Jul 2004
Posts: 3,353
Likes: 5
From: Rohnert Park CA
Just in case.......just so you know,before you cut up anything you shouldnt......
If you are going to wire up the stock FC fuel injection,there is no reason or need to cut up,splice or hack into the FB wiring at any point.
Trust me,Ive had both S4 and S5 FC engines in my 84 with all the factory FC EFI working and neither required any mods to the 1st gen's wiring.The right side is plug and play and the left side must be made from scratch and powered up through an FC fuse box and main relay.You could drop the entire FC dash harness into the FB,but its much easier and cleaner to just lay out the 12-15 wires needed and just make a new left side harness.
If you are going to wire up the stock FC fuel injection,there is no reason or need to cut up,splice or hack into the FB wiring at any point.
Trust me,Ive had both S4 and S5 FC engines in my 84 with all the factory FC EFI working and neither required any mods to the 1st gen's wiring.The right side is plug and play and the left side must be made from scratch and powered up through an FC fuse box and main relay.You could drop the entire FC dash harness into the FB,but its much easier and cleaner to just lay out the 12-15 wires needed and just make a new left side harness.