Transmission interchange information
#1
Senior Member
Thread Starter
Transmission interchange information
From forum
https://www.rx7club.com/1st-gen-arch...mation-783499/
"On the S5 N/A transmission in a 81-85 model there are modifications needed.
You remove the rear counterweight or harmonic balancer as they call it removed from the S5 transmission then swap the tail shaft housings over.
You would use your appropriate drive shaft from your 81-85 model with the S5 transmission."
So we are clear! The harmonic balancer is not needed, and the 12a tail shaft will not fit on the S5 transmission with the balancer on it? And removing it will not mess with the balance of the transmission. Yes?
https://www.rx7club.com/1st-gen-arch...mation-783499/
"On the S5 N/A transmission in a 81-85 model there are modifications needed.
You remove the rear counterweight or harmonic balancer as they call it removed from the S5 transmission then swap the tail shaft housings over.
You would use your appropriate drive shaft from your 81-85 model with the S5 transmission."
So we are clear! The harmonic balancer is not needed, and the 12a tail shaft will not fit on the S5 transmission with the balancer on it? And removing it will not mess with the balance of the transmission. Yes?
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,844
Received 2,605 Likes
on
1,848 Posts
From forum
https://www.rx7club.com/1st-gen-arch...mation-783499/
"On the S5 N/A transmission in a 81-85 model there are modifications needed.
You remove the rear counterweight or harmonic balancer as they call it removed from the S5 transmission then swap the tail shaft housings over.
You would use your appropriate drive shaft from your 81-85 model with the S5 transmission."
So we are clear! The harmonic balancer is not needed, and the 12a tail shaft will not fit on the S5 transmission with the balancer on it? And removing it will not mess with the balance of the transmission. Yes?
https://www.rx7club.com/1st-gen-arch...mation-783499/
"On the S5 N/A transmission in a 81-85 model there are modifications needed.
You remove the rear counterweight or harmonic balancer as they call it removed from the S5 transmission then swap the tail shaft housings over.
You would use your appropriate drive shaft from your 81-85 model with the S5 transmission."
So we are clear! The harmonic balancer is not needed, and the 12a tail shaft will not fit on the S5 transmission with the balancer on it? And removing it will not mess with the balance of the transmission. Yes?