CHEF_EG_1

I have a set of VERY rare Centerline IMSA wheels, 15x7", with a 4" lip.

Centerline Wheels has told me that they are one of SEVEN sets ever made in 4x110mm. Yes, there's 28 of these wheels in the world, and I have 4 of them.


They appraised them @ $3,100 with no damage. There is ZERO damage on these wheels. Not even scratches. They have 205/50-15 Falken Azenis Sports on them (fronts have 80% tread, rears have ~40%)

Since I'm converting over to the GSL-SE bolt pattern, with it's 4x114.3mm bolt pattern, I won't be needing the 4x110mm Centerlines anymore.

Here's what I need, though.
I need a 12A or 13B (4port only) Bridgeport. Considering the value of the rims, I'd like to get a motor that is either brand spanking new, or VERY low miles, and in near perfect condition... built by a competent engine builder.

Please PM me or Call my cell:
309.530.3856


Thanks!
-- Evan

Max7

Do they come with the aftermarket Skull valve caps?

I doubt your going to find someone in the 1st gen section who will drop $3k for a set of rims

Not to say they are not worth it. But only a collector with $ to blow would want them.

How about a shot of the whole car to get a better idea?

CHEF_EG_1

That's why I'd like to just get a motor instead.


12A and 13B bridgeports go for about 2K. I'd like to just trade even up.


And the skull valve stem caps were a gag gift given to me by a friend. I just left them on there.

S2-13BT

Ask in the older rotaries sections too.

Would go nicely on a clean RX3 or 2!