TMC Springs
#1
TMC Springs
anyone ever heard of these springs i some how one day got word that their spring rates were 155 & 125 compaired to RB's 145 &110 if this is so what is the drop like also i think i really want some of these!!! does anyone know where i can get info on them or know any suppliers... better yet who has them and what do they think
#3
Coil Springs - Front
1979-85 RX-7
Part Number: 14018
Retail Price: $50.00
Qty:
1979-85 RX-7 (All models) Front Coil Springs
Racing Beat designed coil springs are suitable for a variety of street, autocross, and race applications. These linear rate springs interchange exactly with the stock springs and will not come loose when the car is jacked up.
These 1979-85 RX-7 springs will provide a front and rear drop of approximately 1 inch. The spring rates are as follows: front - 145, rear - 121. This equates to a 20 percent increase over the stock rates.
Part number and price listed are for one (1) spring.
1979-85 RX-7
Part Number: 14018
Retail Price: $50.00
Qty:
1979-85 RX-7 (All models) Front Coil Springs
Racing Beat designed coil springs are suitable for a variety of street, autocross, and race applications. These linear rate springs interchange exactly with the stock springs and will not come loose when the car is jacked up.
These 1979-85 RX-7 springs will provide a front and rear drop of approximately 1 inch. The spring rates are as follows: front - 145, rear - 121. This equates to a 20 percent increase over the stock rates.
Part number and price listed are for one (1) spring.
#4
Rotary Enthusiast
TMC is what SpecRX7 in this area was using for a lowering spring... They are not being made anymore from what I've heard... And I've got the LAST set... hehe...
Dan
Dan
#5
Airflow is my life
#6
Senior Member
I know this is resurrecting an old thread but Dan...you are wrong....
I got the last set of TMC lowering springs...lmao.
I just finished painting them...didn'tlike the blue color on them....as soon as I get the rest of the front end parts they are going on the 4 corners of the old girl...
The following users liked this post:
JOE68 (04-10-20)
Thread
Thread Starter
Forum
Replies
Last Post